Stainless Steel Worm-Drive Clamp is a product in the clamps & supports family for fluid conduction in stainless steel. 14 sizes published with per-variant price and availability. Price from $ 1.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59239-01 | 7/32" - 5/8" (5.6mm - 16mm) | $ 1.000 | In stock | ||
| VT-59239-02 | 7/16" - 3/4" (11mm - 20mm) | $ 1.000 | In stock | ||
| VT-59239-03 | 1/2" - 7/8" (13mm - 23mm) | $ 1.000 | In stock | ||
| VT-59239-04 | 9/16" - 1-1/16" (14mm - 27mm) | $ 1.000 | In stock | ||
| VT-59239-05 | 11/16" - 1-1/4" (17mm - 32mm) | $ 1.000 | In stock | ||
| VT-59239-06 | 13/16" - 1-1/2" (21mm - 38mm) | $ 1.000 | In stock | ||
| VT-59239-07 | 13/16" - 1-3/4" (21mm - 44mm) | $ 1.000 | In stock | ||
| VT-59239-08 | 1-1/16" - 2" (27mm - 51mm) | $ 1.000 | In stock | ||
| VT-59239-09 | 1-5/16" - 2-1/4" (33mm - 57mm) | $ 1.000 | In stock | ||
| VT-59239-10 | 1-9/16" - 2-1/2" (40mm - 64mm) | $ 1.000 | In stock | ||
| VT-59239-11 | 2-1/16" - 3" (52mm - 76mm) | $ 1.000 | In stock | ||
| VT-59239-12 | 2-13/16" - 3-3/4" (71mm - 95mm) | $ 1.000 | In stock | ||
| VT-59239-13 | 3-9/16" - 4-1/2" (91mm - 114mm) | $ 1.000 | In stock | ||
| VT-59239-14 | 5-5/8" - 6-1/2" (92mm - 165mm) | $ 1.000 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Clamps & supports |
| Material | Acero inoxidable |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
Stainless Steel Worm-Drive Clamp is a TECTUL product for tightening flexible hoses, small ducts and circular connections in water, air, washdown, equipment and environments where corrosion resistance is required. This reference is different because it uses a worm screw mechanism with perforated band, more adjustable than a fixed-size clamp. The main material is stainless steel. This lot does not report a closed dimensional standard; therefore selection must be confirmed with actual size, material, application, environment and fastening method. To quote correctly, it is useful to provide nominal size or actual outside diameter, quantity, type of pipe or hose, working environment, anchoring surface and whether the installation requires disassembly, frequent cleaning, corrosion resistance or vibration control. We do not publish a single load capacity, pressure or torque because performance depends on the support, bolting, line material, temperature, vibration, anchorage and the project mounting criteria.
| Reported actual size | Presentation |
|---|---|
| 7/32" - 5/8" (5.6mm - 16mm) | Sold by units (Unit) |
| 7/16" - 3/4" (11mm - 20mm) | Sold by units (Unit) |
| 1/2" - 7/8" (13mm - 23mm) | Sold by units (Unit) |
| 9/16" - 1-1/16" (14mm - 27mm) | Sold by units (Unit) |
| 11/16" - 1-1/4" (17mm - 32mm) | Sold by units (Unit) |
| 13/16" - 1-1/2" (21mm - 38mm) | Sold by units (Unit) |
| 13/16" - 1-3/4" (21mm - 44mm) | Sold by units (Unit) |
| 1-1/16" - 2" (27mm - 51mm) | Sold by units (Unit) |
| 1-5/16" - 2-1/4" (33mm - 57mm) | Sold by units (Unit) |
| 1-9/16" - 2-1/2" (40mm - 64mm) | Sold by units (Unit) |
| 2-1/16" - 3" (52mm - 76mm) | Sold by units (Unit) |
| 2-13/16" - 3-3/4" (71mm - 95mm) | Sold by units (Unit) |
| 3-9/16" - 4-1/2" (91mm - 114mm) | Sold by units (Unit) |
| 5-5/8" - 6-1/2" (92mm - 165mm) | Sold by units (Unit) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this stainless steel worm-drive clamp indicating size, quantity, material, application and city to confirm availability and price.
The price depends on size, material, quantity, availability and type of installation. At TECTUL we quote using the actual installation data to avoid incorrect references.
Stainless steel resists corrosion and washdown better; galvanized is practical for general service when the environment does not require stainless steel.
Choose a range that leaves the screw working in the middle adjustment zone, not at the opening or closing limit.
Send size, quantity, required material, a photo of the point if it is a replacement, type of pipe or hose, working environment and dispatch city.
It depends on the material and coating. For moisture, washdown or corrosion, stainless steel or hot-dip galvanized is usually preferred depending on the case.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Galvanized Clevis Hanger Clamp, Clevis Pipe Support
Channel Strut Clamp
Stainless Steel Industrial Clamp
Galvanized Omega Clamp
Stainless Steel Sanitary SupportUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
