Hot-Dip Galvanized U-Bolt Clamp is a product in the clamps & supports family for fluid conduction in galvanized steel. Available made to order, quoted via WhatsApp.
| Family | Clamps & supports |
| Material | Galvanizado |
| Connection | Other |
| Availability | Made to order |
Hot-Dip Galvanized U-Bolt Clamp is a TECTUL product for fastening pipe outdoors, on steel structures, exposed areas or installations where a galvanized coating with higher environmental resistance is required. This reference is different because its hot-dip galvanized coating differentiates it from a commercial galvanized U-bolt for indoor or general service. The main material is hot-dip galvanized steel. The technical reference to consider is hot-dip galvanizing according to ASTM A123 when the project requires it; if the project requires formal compliance, certificates or load calculations, it must be validated against the technical data sheet and drawings. To quote correctly, it is useful to provide nominal size or actual outside diameter, quantity, type of pipe or hose, working environment, anchoring surface and whether the installation requires disassembly, frequent cleaning, corrosion resistance or vibration control. We do not publish a single load capacity, pressure or torque because performance depends on the support, bolting, line material, temperature, vibration, anchorage and the project mounting criteria.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this hot-dip galvanized U-bolt clamp indicating size, quantity, material, application and city to confirm availability and price.
The price depends on size, material, quantity, availability and type of installation. At TECTUL we quote using the actual installation data to avoid incorrect references.
Hot-dip galvanized is specified for greater environmental exposure; conventional galvanized is used in less aggressive general installations.
Protect the thread during transport and installation, and avoid removing coating in critical corrosion areas.
Send size, quantity, required material, a photo of the point if it is a replacement, type of pipe or hose, working environment and dispatch city.
It depends on the material and coating. For moisture, washdown or corrosion, stainless steel or hot-dip galvanized is usually preferred depending on the case.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Galvanized Clevis Hanger Clamp, Clevis Pipe Support
Channel Strut Clamp
Stainless Steel Industrial Clamp
Galvanized Omega Clamp
Stainless Steel Sanitary SupportUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
