Rigid Grooved Coupling is a product in the pipe fittings family for fluid conduction in iron. 10 sizes published with per-variant price and availability. Grooved connection. Price from $ 20.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59139-01 | 1" | $ 20.600 | In stock | ||
| VT-59139-02 | 1-1/4" | $ 20.600 | In stock | ||
| VT-59139-03 | 1-1/2" | $ 20.600 | In stock | ||
| VT-59139-04 | 2" | $ 20.600 | In stock | ||
| VT-59139-05 | 2-1/2" | $ 20.600 | In stock | ||
| VT-59139-06 | 3" | $ 20.600 | In stock | ||
| VT-59139-07 | 4" | $ 20.600 | In stock | ||
| VT-59139-08 | 5" (Bajo pedido) | $ 20.600 | Made to order | ||
| VT-59139-09 | 6" (Bajo pedido) | $ 20.600 | Made to order | ||
| VT-59139-10 | 8" (Bajo pedido) | $ 20.600 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Hierro |
| Connection | Grooved |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The rigid grooved coupling is used to join two grooved pipe ends when mechanical continuity, firm alignment and faster maintenance than a welded joint are required. TECTUL offers it in iron, per unit, for water conveying networks, fire protection systems, pumping and industrial sections where the design allows grooved connection. It differs from a flexible coupling because it restricts angular movement more and helps maintain the position of the section; therefore it is useful in pump rooms, manifolds and supported lines. Selection must start from pipe diameter, groove profile, gasket compatible with the fluid and the project test procedure. Pressure should not be assumed by size: capacity depends on manufacturer, groove, gasket, temperature and applicable installation standard.
| Available size | Observation |
|---|---|
| 1" | According to lot availability |
| 1-1/4" | According to lot availability |
| 1-1/2" | According to lot availability |
| 2" | According to lot availability |
| 2-1/2" | According to lot availability |
| 3" | According to lot availability |
| 4" | According to lot availability |
| 5" (Bajo pedido) | According to lot availability |
| 6" (Bajo pedido) | According to lot availability |
| 8" (Bajo pedido) | According to lot availability |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch rigid grooved coupling to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp indicating size, material, quantity, working fluid and required connection type to confirm availability and equivalent alternative when applicable.
The price depends on size, quantity, material and availability. Send us the reference via WhatsApp and TECTUL will quote with delivery to your city.
The actual sizes recorded for this lot are: 1", 1-1/4", 1-1/2", 2", 2-1/2", 3" and other lot sizes. Confirm availability before purchase because some references may be handled on request.
This page corresponds to Rigid Grooved Coupling: it differs by material, connection or geometry. It should not be substituted without validating diameter, installation and line function.
Installation must respect the product connection type: threaded with compatible sealant, grooved with correct gasket and coupling, welded with qualified procedure, or PVC/PE according to system preparation.
It depends on the material, seals, project standard, temperature and fluid. TECTUL helps validate technical compatibility before dispatch.
Yes. We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia, coordinating transport according to volume, weight and urgency of the order.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded Ends
Grooved Bell ReducerUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
