Stainless Steel 150lb Slip-On Flange is a product in the flanges & studs family for fluid conduction in stainless steel. 12 sizes published with per-variant price and availability. Price from $ 42.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-86920-01 | 1/2" | $ 42.000 | In stock | ||
| VT-86920-02 | 3/4" | $ 42.000 | In stock | ||
| VT-86920-03 | 1" | $ 42.000 | In stock | ||
| VT-86920-04 | 1-1/4" | $ 42.000 | In stock | ||
| VT-86920-05 | 1-1/2" | $ 42.000 | In stock | ||
| VT-86920-06 | 2" | $ 42.000 | In stock | ||
| VT-86920-07 | 2-1/2" | $ 42.000 | Made to order | ||
| VT-86920-08 | 3" | $ 42.000 | In stock | ||
| VT-86920-09 | 4" | $ 42.000 | In stock | ||
| VT-86920-10 | 6" | $ 42.000 | Made to order | ||
| VT-86920-11 | 8" | $ 42.000 | In stock | ||
| VT-86920-12 | 12" | $ 42.000 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Flanges & studs |
| Material | Acero inoxidable |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
| Available size | Presentation |
|---|---|
| 1/2" | Unit |
| 3/4" | Unit |
| 1" | Unit |
| 1-1/4" | Unit |
| 1-1/2" | Unit |
| 2" | Unit |
| 2-1/2" | Unit |
| 3" | Unit |
| 4" | Unit |
| 6" | Unit |
| 8" | Unit |
| 12" | Unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
At TECTUL we help you choose a stainless steel 150 lb slip on flange compatible with the line, gasket, and fastening elements. We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp indicating size, material, class, and quantity.
The price depends on size, material, class, and lot availability. At TECTUL we quote by unit with the exact reference to avoid incompatible purchases.
It differs by the main connection attribute, material, or class. For replacements, compare nominal size, face, bolt pattern, and joint type before purchasing.
Present the faces without forcing, select a compatible gasket, install all studs, and tighten in a cross pattern following the project procedure.
Indicate nominal size, material, required class or standard, connection type, service fluid, and number of units.
It depends on material compatibility, gasket, temperature, and design pressure. Final selection must be validated with the system engineering.
Yes. We dispatch to Bogotá, Medellín, Cali, Barranquilla, and other cities in Colombia depending on availability and transport conditions.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Solvent-Weld PVC Flange
Grooved Flat Flange
Short Stainless Steel Sanitary Ferrule
Carbon Steel 150lb Slip-On Flange
Carbon Steel Flange StudUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
