High-Temperature Fiberglass Duct is a product in the hoses family for fluid conduction in glass. 22 sizes published with per-variant price and availability. Price from $ 729.827 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-142151-01 | 2'' - Longitud: 10 m | $ 729.827 | In stock | ||
| VT-142151-02 | 3" - Longitud: 10 m | $ 729.827 | In stock | ||
| VT-142151-03 | 4" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-04 | 5" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-05 | 6" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-06 | 7" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-07 | 8" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-08 | 9" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-09 | 10" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-10 | 11" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-11 | 12" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-12 | 13" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-13 | 14" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-14 | 15" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-15 | 16" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-16 | 18" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-17 | 19" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-18 | 20" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-19 | 21" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-20 | 22" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-21 | 23" - Longitud: 10 m | $ 729.827 | Made to order | ||
| VT-142151-22 | 24" - Longitud: 10 m | $ 729.827 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Hoses |
| Material | Vidrio |
| Connection | Other |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The High-Temperature Fiberglass Duct from TECTUL is a technical product for hot-air extraction, ovens, drying and industrial ventilation. It is selected by size, material or construction, fluid compatibility, connection type and actual operating conditions. Its base material or construction is fiberglass. It differs from polyester duct because fiberglass is selected for more severe thermal environments. To quote correctly, indicate diameter or size, quantity, length or rolls, fluid, temperature, suction or discharge service, and required connection.
| Size | Presentation |
|---|---|
| 2'' | 10 m |
| 3" | 10 m |
| 4" | 10 m |
| 5" | 10 m |
| 6" | 10 m |
| 7" | 10 m |
| 8" | 10 m |
| 9" | 10 m |
| 10" | 10 m |
| 11" | 10 m |
| 12" | 10 m |
| 13" | 10 m |
| 14" | 10 m |
| 15" | 10 m |
| 16" | 10 m |
| 18" | 10 m |
| 19" | 10 m |
| 20" | 10 m |
| 21" | 10 m |
| 22" | 10 m |
| 23" | 10 m |
| 24" | 10 m |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this high-temperature fiberglass duct indicating size, quantity, application, city and required connection to confirm availability and price.
The price depends on size, presentation, quantity, availability and required connections. TECTUL quotes according to the actual installation data.
The difference is the intended service and construction. This reference is selected for hot-air extraction, ovens, drying and industrial ventilation, while the alternative should be validated separately.
Install without torsion, use compatible connections and verify leak-tightness or operation before putting the line or component into service.
Send size, quantity, length or presentation, fluid, operating temperature, application, city and required connection or terminal type.
No. Compatibility depends on material, fluid, pressure, temperature, cleanliness, vibration and actual service conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Black Hose for Potable Water (Roll)
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction HoseUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
