Black Hose for Potable Water (Roll) is a product in the hoses family for fluid conduction. 8 sales packages published with per-variant price and availability. Price from $ 91.667 COP before VAT.
| SKU | Diameter | Package | Length | Price | Availability | Qty | |
|---|---|---|---|---|---|---|---|
| VT-manguera-de-agua-potable-01 | 1/2" | Roll | 100 m | $ 91.667 | In stock | ||
| VT-manguera-de-agua-potable-02 | 3/4" | Roll | 100 m | $ 141.667 | In stock | ||
| VT-manguera-de-agua-potable-03 | 1" | Roll | 100 m | $ 191.667 | In stock | ||
| VT-manguera-de-agua-potable-04 | 1-1/4" | Roll | 100 m | $ 291.667 | In stock | ||
| VT-manguera-de-agua-potable-05 | 1-1/2" | Roll | 100 m | $ 400.000 | In stock | ||
| VT-manguera-de-agua-potable-06 | 2" | Roll | 100 m | $ 583.333 | In stock | ||
| VT-manguera-de-agua-potable-07 | 3" | Roll | 50 m | $ 708.333 | In stock | ||
| VT-manguera-de-agua-potable-08 | 4" | Roll | 50 m | $ 600.000 | In stock |
Sold by roll or full length only — no partial cuts. Price per package before VAT; confirmed in the quote together with shipping.
| Family | Hoses |
| Connection | Other |
| Availability | Made to order |
The black polyethylene hose is the fastest and most economical way to convey water on farms, jobsites, irrigation, and temporary or buried networks: lightweight, flexible, weather-resistant thanks to its UV protection, and available in long rolls that minimize joints. It is sold by complete roll — 100 m in diameters from 1/2" to 2" and 50 m in 3" and 4" — with no partial cuts.
| Diameter | Roll | Typical use |
|---|---|---|
| 1/2" | 100 m | Residential service connections, drip irrigation, yard lines |
| 3/4" | 100 m | Distribution on farms and nurseries |
| 1" | 100 m | Main conveyance on farms, tank supplies |
| 1-1/4" – 1-1/2" | 100 m | Medium-capacity irrigation networks |
| 2" | 100 m | Higher-flow conveyance, light pumping |
| 3" – 4" | 50 m | High-flow conveyance, discharges, and supplies |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polyethylene is the global standard material for potable water conveyance (PE water supply systems are governed by references such as ISO 4427). For drinking water installations with a formal sanitary requirement, request the manufacturer's technical data sheet for the lot with your quote — we provide it together with the available certificate. It is not required for irrigation and general conveyance.
Complete rolls with dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp indicating diameter, number of rolls, and city.
The price is per complete roll (100 m up to 2"; 50 m in 3" and 4") and varies by diameter. The presentations table on this page lists each size — request the formal quote via WhatsApp with your delivery city.
No: the sales presentation is by complete roll or full section, with no partial cuts. This preserves a continuous piece with fewer joints and fewer leak points.
Polyethylene is the standard material for water conveyance. If your installation is for human consumption with a sanitary requirement, request the manufacturer's lot data sheet with your quote; for irrigation and general conveyance the standard reference is sufficient.
They are different products: the gas line is specifically certified for fuels, with another wall material and marking. Never interchange them — both references are in the catalog.
With compression couplings or barbed fittings and clamps of the nominal diameter. Cut straight, do not force tight bends, and protect vehicle crossings if buried.
Yes — the black pigment with UV protection is designed for outdoor exposure. Even so, in permanent exposed runs it is advisable to fix it to avoid movement fatigue.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction Hose
Hose With Wire ReinforcementUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
