Air Compressor Hose is a product in the hoses family for fluid conduction. 4 sales packages published with per-variant price and availability. Price from $ 930.535 COP before VAT.
| SKU | Diameter | Package | Length | Price | Availability | Qty | |
|---|---|---|---|---|---|---|---|
| VT-142195-01 | 1/4" | Roll | 100 m | $ 930.535 | In stock | ||
| VT-142195-02 | 3/8" | Roll | 100 m | $ 1.240.715 | In stock | ||
| VT-142195-03 | 1/2" | Roll | 100 m | $ 1.646.735 | In stock | ||
| VT-142195-04 | 1" | Roll | 100 m | $ 5.566.972 | In stock |
Sold by roll or full length only — no partial cuts. Price per package before VAT; confirmed in the quote together with shipping.
| Family | Hoses |
| Connection | Other |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The air compressor hose is a textile-reinforced rubber hose for compressed air and water, with a working pressure of 300 psi (20.7 bar). The type construction uses an SBR inner tube, polyester textile reinforcement and an ozone- and weather-resistant EPDM/SBR cover, with service from −26 °C to +82 °C. Sold by roll.
| Feature | Specification |
|---|---|
| Working pressure | 300 psi (20.7 bar / 2.07 MPa) at ambient temperature |
| Type reference standard | ISO 2398:2024 — textile-reinforced rubber hoses for compressed air (scope up to 25 bar) |
| Inner tube | SBR synthetic rubber |
| Reinforcement | Polyester textile |
| Cover | EPDM/SBR, ozone and weather resistant |
| Service temperature | −26 °C to +82 °C (−14 °F to +180 °F) — confirm per lot |
| Lot diameters | 3/16" to 2" (4.8 to 50.8 mm) |
| Presentation | 100 m roll from 3/16" to 1"; length for 1-1/4" to 2" confirm when quoting |
| Burst pressure | Confirm manufacturer data sheet when quoting |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp with TECTUL indicating diameter, number of rolls, fluid and required connection to confirm availability.
Working pressure is 300 psi (20.7 bar) at ambient temperature, within the scope of ISO 2398:2024 for textile-reinforced rubber compressed air hoses (up to 25 bar). Lot burst pressure is confirmed with the manufacturer data sheet.
Yes. It is a multipurpose hose for compressed air and service water; it is not specified for steam, and compatibility with oils or chemicals is confirmed with the manufacturer data sheet before purchase.
The compressor hose is textile-reinforced rubber for workshop and outdoor service at 300 psi; the polyurethane pneumatic hose is calibrated tubing for automation with push-in fittings and works at lower pressures.
It is quoted per full 100 m roll in diameters 3/16" to 1", with no partial cuts; length and availability for 1-1/4" to 2" are confirmed when quoting.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Black Hose for Potable Water (Roll)
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction HoseUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
