Rubber Water Discharge Hose is a product in the hoses family for fluid conduction in rubber. 15 sizes published with per-variant price and availability. Price from $ 130.035 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-142385-01 | 1'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-02 | 1-1/4'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-03 | 1-1/2'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-04 | 1-3/4'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-05 | 2'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-06 | 2-1/4'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-07 | 2-1/2'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-08 | 2-3/4'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-09 | 3'' - Longitud: 60 m | $ 130.035 | In stock | ||
| VT-142385-10 | 3-1/2'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-11 | 4'' - Longitud: 60 m | $ 130.035 | Made to order | ||
| VT-142385-12 | 4-1/2'' - Longitud: m | $ 130.035 | Made to order | ||
| VT-142385-13 | 5'' - Longitud: m | $ 130.035 | Made to order | ||
| VT-142385-14 | 6'' - Longitud: m | $ 130.035 | Made to order | ||
| VT-142385-15 | 8'' - Longitud: m | $ 130.035 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Hoses |
| Material | Caucho |
| Connection | Other |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The TECTUL Rubber water discharge hose is a flexible conveying solution for water discharge in pumping, drainage, and jobsite work. It is specified by diameter, material, construction, fluid compatibility, and installation method; therefore the quote must cross-check the actual equipment size with the operating service. Its base material is rubber and the reference is oriented to selection by service compatibility. Unlike a lay flat hose, it keeps a rubber body for industrial work and more robust handling in discharge. To buy correctly, it is not enough to request “hose” by inches: it is advisable to indicate whether it will work in suction, discharge, air, steam, fuel, food, chemical, or ventilation service, as well as the expected coupling type. At TECTUL we help select an alternative consistent with the fluid, routing, handling, and available presentation.
| Size | Reported presentation / length |
|---|---|
| 1'' | 60 m |
| 1-1/4'' | 60 m |
| 1-1/2'' | 60 m |
| 1-3/4'' | 60 m |
| 2'' | 60 m |
| 2-1/4'' | 60 m |
| 2-1/2'' | 60 m |
| 2-3/4'' | 60 m |
| 3'' | 60 m |
| 3-1/2'' | 60 m |
| 4'' | 60 m |
| 4-1/2'' | m |
| 5'' | m |
| 6'' | m |
| 8'' | m |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for the rubber water discharge hose, indicating size, quantity, fluid, and required connection to confirm availability and price.
The price depends on size, presentation, quantity, and couplings. Send us the application and diameter to quote the correct TECTUL reference.
A lay flat hose compacts for storage and temporary irrigation; this rubber reference is suitable when a discharge line with greater resistance to jobsite abuse is required.
Use couplings of the correct diameter, secure compatible clamps, and avoid dragging it over sharp edges.
Indicate diameter, length or rolls, fluid, operating temperature, whether it works in suction or discharge, and connection type.
No. Compatibility depends on the hose material, fluid, cleanliness, temperature, and actual service conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Black Hose for Potable Water (Roll)
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction HoseUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
