Fuel Suction Hose 150 Psi is a product in the hoses family for fluid conduction. 7 sales packages published with per-variant price and availability. Price from $ 9.615.264 COP before VAT.
| SKU | Diameter | Package | Length | Price | Availability | Qty | |
|---|---|---|---|---|---|---|---|
| VT-142371-01 | 2" | Roll | 60 m | $ 9.615.264 | In stock | ||
| VT-142371-02 | 2-1/4" | Roll | 60 m | Request a quote | In stock | ||
| VT-142371-03 | 2-1/2" | Roll | 60 m | Request a quote | In stock | ||
| VT-142371-04 | 2-3/4" | Roll | 60 m | Request a quote | In stock | ||
| VT-142371-05 | 3" | Roll | 60 m | $ 14.467.948 | In stock | ||
| VT-142371-06 | 3-1/2" | Roll | 60 m | Request a quote | In stock | ||
| VT-142371-07 | 4" | Roll | 60 m | $ 21.918.632 | In stock |
Sold by roll or full length only — no partial cuts. Price per package before VAT; confirmed in the quote together with shipping.
| Family | Hoses |
| Connection | Other |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The TECTUL Fuel Suction Hose 150 PSI is a flexible conveying solution for suction and transfer of gasoline, diesel and compatible derivatives, selected by diameter, fluid compatibility, bend radius, connection type and actual installation conditions. Its base material is rubber for compatible fuel, so it must be specified according to the fluid, operating temperature, installation environment and expected movement of the section. Unlike Fuel Suction Hose 300 Psi, this page focuses on this reference corresponding to the 150 PSI line; the 300 PSI line is compared only when the design requires it. For industrial purchasing, correct selection does not depend only on diameter: coupling method, abrasion exposure, crushing risk, fluid cleanliness and periodic inspection also matter.
| Available size | Note |
|---|---|
| 1'' - Length: 60 m | Actual data from the TECTUL catalog |
| 1-1/4'' - Length: 60 m | Actual data from the TECTUL catalog |
| 1-1/4'' - Length: 60 m | Actual data from the TECTUL catalog |
| 1-3/4'' - Length: 60 m | Actual data from the TECTUL catalog |
| 2'' - Length: 60 m | Actual data from the TECTUL catalog |
| 2-1/4'' - Length: 60 m | Actual data from the TECTUL catalog |
| 2-1/2'' - Length: 60 m | Actual data from the TECTUL catalog |
| 2-3/4'' - Length: 60 m | Actual data from the TECTUL catalog |
| 3'' - Length: 60 m | Actual data from the TECTUL catalog |
| 3-1/2'' - Length: 60 m | Actual data from the TECTUL catalog |
| 4'' - Length: 60 m | Actual data from the TECTUL catalog |
| 4-1/2'' - Length: m | Actual data from the TECTUL catalog |
| 5'' - Length: m | Actual data from the TECTUL catalog |
| 6'' - Length: 35 m | Actual data from the TECTUL catalog |
| 8'' - Length: 35 m | Actual data from the TECTUL catalog |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp with TECTUL indicating product, size, quantity, fluid, required connection and working conditions to confirm availability and a compatible technical alternative.
The price depends on size, presentation, quantity and availability. TECTUL quotes via WhatsApp with the exact reference and conditions of use.
It differs because this reference corresponds to the 150 PSI line; the 300 PSI line is compared only when the design requires it. Therefore, the need for conveying, suction, discharge, protection or connection should be separated before purchasing.
It must be installed without torsion, with compatible couplings, without tight bends and with enough support so weight or vibration does not load the ends.
The sizes loaded for this reference are: 1'' - Length: 60 m, 1-1/4'' - Length: 60 m, 1-1/4'' - Length: 60 m, 1-3/4'' - Length: 60 m, 2'' - Length: 60 m, 2-1/4'' - Length: 60 m, 2-1/2'' - Length: 60 m, 2-3/4'' - Length: 60 m, 3'' - Length: 60 m, 3-1/2'' - Length: 60 m, 4'' - Length: 60 m, 4-1/2'' - Length: m, 5'' - Length: m, 6'' - Length: 35 m, 8'' - Length: 35 m.
It is recommended for suction and transfer of gasoline, diesel and compatible derivatives, always validating compatibility of the rubber for compatible fuel, temperature, fluid, connection and mechanical demand of the system.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia, subject to availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Black Hose for Potable Water (Roll)
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction HoseUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
