Pneumatic Hose is a product in the hoses family for fluid conduction. 9 sales packages published with per-variant price and availability. Price from $ 186.067 COP before VAT.
| SKU | Diameter | Package | Length | Price | Availability | Qty | |
|---|---|---|---|---|---|---|---|
| VT-120195-01 | 1/4" | Roll | 200 m | $ 444.512 | In stock | ||
| VT-120195-02 | 3/8" | Roll | 100 m | $ 425.542 | In stock | ||
| VT-120195-03 | 1/2" | Roll | 100 m | $ 597.825 | In stock | ||
| VT-120195-04 | 4 mm | Roll | 200 m | $ 186.067 | In stock | ||
| VT-120195-05 | 6 mm | Roll | 200 m | $ 327.338 | In stock | ||
| VT-120195-06 | 8 mm | Roll | 100 m | $ 258.425 | In stock | ||
| VT-120195-07 | 10 mm | Roll | 100 m | $ 427.263 | In stock | ||
| VT-120195-08 | 12 mm | Roll | 100 m | $ 597.825 | In stock | ||
| VT-120195-09 | 16 mm | Roll | 100 m | $ 851.083 | In stock |
Sold by roll or full length only — no partial cuts. Price per package before VAT; confirmed in the quote together with shipping.
| Family | Hoses |
| Connection | Other |
| Sales unit | Se vende por Rollos (Roll.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The TECTUL Polyurethane Pneumatic Hose is a flexible conveying solution for pneumatic lines, automation and push-in connections, selected by diameter, fluid compatibility, bend radius, connection type and actual installation conditions. Its base material is polyurethane, so it must be specified according to the fluid, operating temperature, installation environment and expected movement of the section. It is sold as follows: Sold by rolls (Roll.). Unlike Clear Pneumatic Hose, this page focuses on the blue polyurethane type being used as working tubing; the clear type helps when visual inspection of flow is required. For industrial purchasing, correct selection does not depend only on diameter: coupling method, abrasion exposure, crushing risk, fluid cleanliness and periodic inspection also matter.
| Available size | Note |
|---|---|
| : Pneumatic Hose Roll 4mm x 2.5mm | Actual data from the TECTUL catalog |
| Pneumatic Hose 4mm x 2.5mm x MT | Actual data from the TECTUL catalog |
| Pneumatic Hose Roll 6mm x 4mm | Actual data from the TECTUL catalog |
| Pneumatic Hose 6mm x 4mm x MT | Actual data from the TECTUL catalog |
| Pneumatic Hose Roll 1/4" x 0.167" | Actual data from the TECTUL catalog |
| Pneumatic Hose 1/4" x 0.167" x MT | Actual data from the TECTUL catalog |
| Pneumatic Hose Roll 8mm x 5.5mm | Actual data from the TECTUL catalog |
| Pneumatic Hose 8mm x 5.5mm x MT | Actual data from the TECTUL catalog |
| Pneumatic Hose Roll 3/8" x 0.25" | Actual data from the TECTUL catalog |
| Pneumatic Hose 3/8" x 0.25" x MT | Actual data from the TECTUL catalog |
| Pneumatic Hose Roll 10mm x 6.5mm | Actual data from the TECTUL catalog |
| Pneumatic Hose 10mm x 6.5mm x MT | Actual data from the TECTUL catalog |
| Pneumatic Hose Roll 1/2" x 0.333" | Actual data from the TECTUL catalog |
| Pneumatic Hose 1/2" x 0.333" x MT | Actual data from the TECTUL catalog |
| Pneumatic Hose Roll 12mm x 8mm | Actual data from the TECTUL catalog |
| Pneumatic Hose 12mm x 8mm x MT | Actual data from the TECTUL catalog |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp with TECTUL indicating product, size, quantity, fluid, required connection and working conditions to confirm availability and a compatible technical alternative.
The price depends on size, presentation, quantity and availability. TECTUL quotes via WhatsApp with the exact reference and conditions of use.
It differs because the blue polyurethane type is used as working tubing; the clear type helps when visual inspection of flow is required. Therefore, the need for conveying, suction, discharge, protection or connection should be separated before purchasing.
It must be installed without torsion, with compatible couplings, without tight bends and with enough support so weight or vibration does not load the ends.
The sizes loaded for this reference are: : Pneumatic Hose Roll 4mm x 2.5mm, Pneumatic Hose 4mm x 2.5mm x MT, Pneumatic Hose Roll 6mm x 4mm, Pneumatic Hose 6mm x 4mm x MT, Pneumatic Hose Roll 1/4" x 0.167", Pneumatic Hose 1/4" x 0.167" x MT, Pneumatic Hose Roll 8mm x 5.5mm, Pneumatic Hose 8mm x 5.5mm x MT, Pneumatic Hose Roll 3/8" x 0.25", Pneumatic Hose 3/8" x 0.25" x MT, Pneumatic Hose Roll 10mm x 6.5mm, Pneumatic Hose 10mm x 6.5mm x MT, Pneumatic Hose Roll 1/2" x 0.333", Pneumatic Hose 1/2" x 0.333" x MT, Pneumatic Hose Roll 12mm x 8mm, Pneumatic Hose 12mm x 8mm x MT.
It is recommended for pneumatic lines, automation and push-in connections, always validating compatibility of the polyurethane, temperature, fluid, connection and mechanical demand of the system.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia, subject to availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Black Hose for Potable Water (Roll)
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction HoseUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
