SAE 100 R13 Hose is a product in the hoses family for fluid conduction. 5 sales packages published with per-variant price and availability. Price from $ 2.738.739 COP before VAT.
| SKU | Diameter | Package | Length | Price | Availability | Qty | |
|---|---|---|---|---|---|---|---|
| VT-142238-01 | 3/4" | Roll | 40 m | $ 2.738.739 | In stock | ||
| VT-142238-02 | 1" | Roll | 50 m | Request a quote | In stock | ||
| VT-142238-03 | 1-1/4" | Roll | 50 m | Request a quote | In stock | ||
| VT-142238-04 | 1-1/2" | Roll | 50 m | Request a quote | In stock | ||
| VT-142238-05 | 2" | Roll | 40 m | $ 15.012.458 | In stock |
Sold by roll or full length only — no partial cuts. Price per package before VAT; confirmed in the quote together with shipping.
| Family | Hoses |
| Connection | Other |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The SAE 100 R13 hose is a multiple steel-wire-spiral hydraulic hose for high-pressure circuits: 35 MPa (5,000 psi) constant working pressure across all its sizes per SAE J517:2020, from −40 °C to +121 °C. The lot covers 3/4" to 2" with an oil-resistant synthetic rubber inner tube.
| Feature | Specification |
|---|---|
| Working pressure | 35 MPa (5,000 psi), constant from dash −12 to −32 |
| Minimum burst pressure | 140 MPa (20,000 psi) — 4:1 safety factor |
| Service temperature | −40 °C to +121 °C (−40 °F to +250 °F) with hydraulic oils |
| Construction | Oil-resistant synthetic rubber tube + multiple high-tensile steel wire spirals + abrasion- and weather-resistant cover |
| Comparable European class | Spiral hoses per EN 856:2015 (types 4SP/4SH); exact per-size correspondence confirmed against the manufacturer data sheet |
| Fittings | Crimped per dash with calibrated equipment; quoted together with the hose |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
| Dash | Diameter | Presentation |
|---|---|---|
| −12 | 3/4" | 50 m roll |
| −16 | 1" | 50 m roll |
| −20 | 1-1/4" | By meter — confirm availability |
| −24 | 1-1/2" | By meter — confirm availability |
| −32 | 2" | 36 m roll |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the SAE 100 R13 hose indicating size, meters, required fittings and fluid to confirm availability and price.
35 MPa (5,000 psi) constant working pressure across all sizes from dash −12 to −32, with a minimum burst pressure of 140 MPa (20,000 psi, 4:1 factor), per SAE J517:2020.
R13 keeps 5,000 psi constant across all sizes; R12 allows 4,000 psi only in the smaller sizes and its working pressure drops as diameter grows, per SAE J517:2020. For machinery with severe peaks in large diameters, R13 is specified.
They are comparable spiral hose classes: R13 is a SAE J517:2020 designation and 4SP/4SH are EN 856:2015 types. The exact per-size and pressure correspondence is confirmed against the lot manufacturer data sheet.
From −40 °C to +121 °C with hydraulic oils per SAE J517:2020; with other fluids (water-glycol, emulsions) the upper limit is set by the manufacturer data sheet.
The price depends on the size (3/4" to 2"), the meters, the required crimped fittings and the quantity. TECTUL quotes per roll or per meter with the actual fluid and working pressure.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Black Hose for Potable Water (Roll)
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction HoseUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
