Spiral Hose is a product in the hoses family for fluid conduction. 8 sales packages published with per-variant price and availability. Price from $ 11.263 COP before VAT.
| SKU | Diameter | Package | Length | Price | Availability | Qty | |
|---|---|---|---|---|---|---|---|
| VT-86965-01 | 6 mm x 5 mts | Full length | 1 m | $ 11.263 | In stock | ||
| VT-86965-02 | 6 mm x 10 mts | Full length | 1 m | $ 22.528 | In stock | ||
| VT-86965-03 | 8 mm x 5 mts | Full length | 1 m | $ 18.331 | In stock | ||
| VT-86965-04 | 8 mm x 10 mts | Full length | 1 m | $ 35.399 | In stock | ||
| VT-86965-05 | 10 mm x 5 mts | Full length | 1 m | $ 32.183 | In stock | ||
| VT-86965-06 | 10 mm x 10 mts | Full length | 1 m | $ 64.363 | In stock | ||
| VT-86965-07 | 12 mm x 5 mts | Full length | 1 m | $ 37.491 | In stock | ||
| VT-86965-08 | 12 mm x 10 mts | Full length | 1 m | $ 84.316 | In stock |
Sold by roll or full length only — no partial cuts. Price per package before VAT; confirmed in the quote together with shipping.
| Family | Hoses |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
The spiral air hose is polyurethane (PU) tubing preformed as a coil: it extends during use and retracts by itself, to connect pneumatic tools on benches, booths and production lines without loose sections. The lot covers 6, 8, 10 and 12 mm in 5 and 10 m lengths, without fittings, so the required connector can be fitted.
| Feature | Specification |
|---|---|
| Material | Blue polyurethane (PU), per the manufacturer description |
| Format | Self-retracting coil (spring type), no fittings installed |
| Working pressure | Typical for PU tubing: 8 to 10 bar (0.8–1.0 MPa) at 20 °C per catalogs of manufacturers of the type; decreases with temperature — confirm per lot when quoting |
| Connection | Push-in fitting per ISO 14743:2020 or hose barb with clamp, depending on diameter |
| Fluids | Compressed air, water and neutral fluids, per the manufacturer description |
| Sold | Per unit (coiled length) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
| Diameter | Available lengths |
|---|---|
| 6 mm | 5 m and 10 m |
| 8 mm | 5 m and 10 m |
| 10 mm | 5 m and 10 m |
| 12 mm | 5 m and 10 m |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the spiral air hose indicating diameter, length and quantity to confirm availability and price.
The typical working pressure of coiled PU tubing is 8 to 10 bar (0.8–1.0 MPa) at 20 °C per catalogs of manufacturers of the type, and it decreases as temperature rises. The lot figure is confirmed when quoting.
No. The lot is sold without fittings so the required connector can be adapted: push-in per ISO 14743:2020 or hose barb with clamp, depending on diameter.
The spiral hose is self-retracting PU tubing that keeps the workstation organized and follows the mobile tool; the compressor hose is a straight general-service rubber section with a higher working pressure.
Diameters of 6, 8, 10 and 12 mm, each in 5 m and 10 m lengths.
The price depends on the diameter, the length (5 or 10 m) and the quantity. TECTUL quotes per unit with the exact reference.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Black Hose for Potable Water (Roll)
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction HoseUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
