Transparent Pneumatic Hose is a product in the hoses family for fluid conduction. 5 sales packages published with per-variant price and availability. Price from $ 215.992 COP before VAT.
| SKU | Diameter | Package | Length | Price | Availability | Qty | |
|---|---|---|---|---|---|---|---|
| VT-283597-01 | 4 mm | Roll | 200 m | $ 215.992 | In stock | ||
| VT-283597-02 | 6 mm | Roll | 200 m | $ 343.074 | In stock | ||
| VT-283597-03 | 8 mm | Roll | 100 m | $ 263.592 | In stock | ||
| VT-283597-04 | 10 mm | Roll | 100 m | $ 433.032 | In stock | ||
| VT-283597-05 | 12 mm | Roll | 100 m | $ 624.477 | In stock |
Sold by roll or full length only — no partial cuts. Price per package before VAT; confirmed in the quote together with shipping.
| Family | Hoses |
| Connection | Other |
| Availability | In stock |
The transparent PU air hose is polyurethane pneumatic tubing that lets you see the internal flow of the line, used in automation, cylinders, valves and panels. The lot covers metric sizes from 4×2.5 to 12×10 mm (OD×ID), sold by roll or by meter, and connects to push-in fittings per ISO 14743:2020.
| Feature | Specification |
|---|---|
| Material | Transparent polyurethane (PU) |
| Working pressure | Typical for PU tubing: 10 bar (1.0 MPa / 145 psi) at 20 °C per catalogs of manufacturers of the type; decreases as temperature rises — confirm the lot curve when quoting |
| Service temperature | Typical for PU tubing: −20 °C to +60 °C per catalogs of the type — confirm per lot |
| Connection | Push-in fitting per ISO 14743:2020 (thermoplastic tubes 3 to 16 mm OD), selected by outside diameter |
| Fluids | Compressed air, water and compatible light gases, per the manufacturer description |
| Sold | By roll or by meter |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
| Size | Presentations |
|---|---|
| 4 mm × 2.5 mm | Roll and by meter |
| 6 mm × 4 mm | Roll and by meter |
| 8 mm × 6 mm | Roll and by meter |
| 10 mm × 8 mm | Roll and by meter |
| 12 mm × 10 mm | Roll and by meter |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your transparent PU air hose with size, presentation and quantity.
The typical working pressure of standard-wall PU tubing is 10 bar (1.0 MPa / 145 psi) at 20 °C per catalogs of manufacturers of the type, and it decreases as temperature rises. The lot pressure-temperature curve is confirmed when quoting.
The lot lists 4×2.5, 6×4, 8×6, 10×8 and 12×10 mm (outside × inside diameter), each in roll and by-meter presentations.
Push-in fittings selected by the tubing outside diameter, per ISO 14743:2020, which covers thermoplastic tubes from 3 to 16 mm OD.
The transparent PU is straight metric tubing that lets you see the line; the spiral hose is the same polyurethane preformed as a coil for mobile tools, and the black rubber hose is used as a straight general-service section.
Yes. Every size in the lot has by-meter and roll presentations.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Black Hose for Potable Water (Roll)
Polyethylene Hose for Gas
Hydraulic Hose R2
PE AL PE Pipe
Water Suction HoseUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
