Stainless Steel Instrumentation Elbow is a product in the couplings & quick connects family for fluid conduction in stainless steel. Available made to order, quoted via WhatsApp.
| Family | Couplings & quick connects |
| Material | Acero inoxidable |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
Stainless Steel Instrumentation Elbow is a TECTUL fluid handling fitting for changing the direction of instrumentation, air, gas or compatible fluid lines where corrosion resistance and a clean connection are required. The main material reported for this lot is stainless steel. It is different because it is a stainless steel instrumentation fitting, unlike a bronze OD elbow or a plastic pneumatic prestolok elbow. Selection should not be based only on the commercial name: confirm size, end type, fluid, temperature, seal compatibility, available space and whether the assembly works with hose, tubing, NPT thread, quick coupling or camlock system. When the project requires pressure, certification or dimensional standard, request a technical data sheet before installation; there is no universal maximum pressure because it changes with material, seal, temperature, vibration, assembly and fluid.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this stainless steel instrumentation elbow, indicating size, quantity, fluid, connection and use to confirm availability and price.
The price depends on size, material, connection, quantity and availability. At TECTUL we quote based on the real application to avoid incompatible references.
The stainless elbow is selected for chemical compatibility, cleanliness and corrosion; the bronze OD elbow is used in services compatible with bronze and lower material requirements.
Use compatible tubing, cut burr-free and tighten according to the specified ferrule or compression system to avoid damaging the seat.
Send size, quantity, fluid, connection type, a photo if it is a replacement, and working conditions when the assembly is critical.
No. Compatibility of the body, seals, gaskets and joining method must be validated against the fluid, temperature and line cleanliness.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Modular Hose + Round Nozzle
Prestolok Union
B122 - Brass Hex Nipple
B109 - Brass Male Plug
B60 - Brass Compression SleeveUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
