Gland with Nut is a product in the couplings & quick connects family for fluid conduction. Available made to order, quoted via WhatsApp. Price from $ 24.001 COP before VAT.
| Family | Couplings & quick connects |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
Gland with Nut is a TECTUL fluid handling fitting for sealing and holding a gland-type connection in gas fittings or lines where controlled compression is required. The lot does not report a single material, so the exact construction must be confirmed when quoting. It is different because it includes a tightening nut, unlike a common male or female fitting, since its main function is compression and sealing. Selection should not be based only on the commercial name: confirm size, end type, fluid, temperature, seal compatibility, available space and whether the assembly works with hose, tubing, NPT thread, quick coupling or camlock system. When the project requires pressure, certification or dimensional standard, request a technical data sheet before installation; there is no universal maximum pressure because it changes with material, seal, temperature, vibration, assembly and fluid.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this gland with nut, indicating size, quantity, fluid, connection and use to confirm availability and price.
The price depends on size, material, connection, quantity and availability. At TECTUL we quote based on the real application to avoid incompatible references.
The gland with nut works by compression and sealing; the hose barb is a barb for hose. They are not equivalent parts even if both may look small.
Install only with compatible components, tighten gradually and verify tightness with an approved gas method before use.
Send size, quantity, fluid, connection type, a photo if it is a replacement, and working conditions when the assembly is critical.
No. Compatibility of the body, seals, gaskets and joining method must be validated against the fluid, temperature and line cleanliness.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Modular Hose + Round Nozzle
Prestolok Union
B122 - Brass Hex Nipple
B109 - Brass Male Plug
B60 - Brass Compression SleeveUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
