Aluminum Part B is a product in the couplings & quick connects family for fluid conduction in aluminum. 8 sizes published with per-variant price and availability. Price from $ 15.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58622-01 | 3/4" | $ 15.000 | In stock | ||
| VT-58622-02 | 1" | $ 15.000 | In stock | ||
| VT-58622-03 | 1-1/4" | $ 15.000 | In stock | ||
| VT-58622-04 | 1-1/2" | $ 15.000 | In stock | ||
| VT-58622-05 | 2" | $ 15.000 | In stock | ||
| VT-58622-06 | 2-1/2" | $ 15.000 | In stock | ||
| VT-58622-07 | 3" | $ 15.000 | In stock | ||
| VT-58622-08 | 4" | $ 15.000 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Couplings & quick connects |
| Material | Aluminio |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
Aluminum Type B Camlock Coupling is a TECTUL fluid handling fitting for connecting a male camlock adapter by levers and providing a male thread for equipment, pipe or accessories. The main material reported for this lot is aluminum. It is different because Type B has a female body with levers and male thread, unlike Type D with female thread. The technical selection reference is camlock family A-A-59326 / MIL-C-27487 as a design reference; if the project requires certificate, traceability or standard equivalence, request a technical data sheet before installation. To buy it correctly, asking for “the coupling” or “the fitting” is not enough: confirm nominal size, end type, fluid, temperature, seal compatibility, available space and whether the assembly works with hose, tubing, NPT thread, quick coupling, camlock system or panel. We do not publish a single maximum pressure because performance depends on material, seal, temperature, vibration, support, joining method, fluid and commissioning test.
| Reported actual size | Presentation |
|---|---|
| 3/4" | Sold by units (Unit) |
| 1" | Sold by units (Unit) |
| 1-1/4" | Sold by units (Unit) |
| 1-1/2" | Sold by units (Unit) |
| 2" | Sold by units (Unit) |
| 2-1/2" | Sold by units (Unit) |
| 3" | Sold by units (Unit) |
| 4" | Sold by units (Unit) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this aluminum type b camlock coupling, indicating size, quantity, fluid, connection and use to confirm availability and price.
The price depends on size, material, connection, quantity and availability. At TECTUL we quote with the real installation data to avoid incompatible references.
Part B has male thread; Part D has female thread. Both have levers, but they are not installed on the same thread.
Check the gasket and levers, thread without cross-threading and close both arms evenly before pressurizing or pumping.
Send size, quantity, fluid, connection type, a photo if it is a replacement, and working conditions when the assembly is critical.
No. Compatibility of the body, seals, gaskets and joining method must be validated against the fluid, temperature and line cleanliness.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Modular Hose + Round Nozzle
Prestolok Union
B122 - Brass Hex Nipple
B109 - Brass Male Plug
B60 - Brass Compression SleeveUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
