Bronze Service Inflator is a product in the couplings & quick connects family for fluid conduction in bronze. 1 size published with per-variant price and availability. Price from $ 16.065 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59203-01 | 1/2" | $ 16.065 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Couplings & quick connects |
| Material | Bronce |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
The bronze 1/2 service inflator is a connection accessory for service points where inflation, pressurization or occasional air supply is required without installing a permanent hose union. Its bronze body provides good mechanical strength and stable behavior against environmental corrosion in workshops, industrial maintenance, auxiliary air networks and equipment requiring a compact take-off point. It differs from an industrial quick coupling because its main function is to serve as an inflation or charging point, not as a continuous-use connection for pneumatic tools; and it differs from a Prestolok fitting because it is not intended for push-to-connect plastic tubing. At TECTUL it is specified by connection size, material and application to avoid purchases incompatible with the thread or mounting point.
| Actual lot data | Specification |
|---|---|
| Product | Bronze service inflator |
| Material | Bronze |
| Available size | 1/2" |
| Sales unit | Unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your bronze 1/2" service inflator with TECTUL and confirm availability, connection compatibility and required quantity for maintenance or industrial assembly.
The price depends on availability, quantity and dispatch conditions. At TECTUL we quote per unit with confirmation of 1/2" size before invoicing.
It is used as an inflation, charging or air service point on equipment and auxiliary lines where a compact connection is needed for occasional use.
The quick coupling is intended for frequent connection and disconnection of hoses or pneumatic tools; the service inflator works as an inflation or service point.
It is installed by verifying the thread, cleaning the connection, applying compatible sealant and tightening on the body without forcing attached parts. Then leak-tightness is tested.
Bronze is widely used in air accessories for its mechanical stability and resistance to environmental corrosion; final compatibility depends on the complete system.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on product availability.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Modular Hose + Round Nozzle
Prestolok Union
B122 - Brass Hex Nipple
B109 - Brass Male Plug
B60 - Brass Compression SleeveUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
