Low-Temperature Upright Fire Sprinkler is a product in the fire protection systems family for fluid conduction. Available made to order, quoted via WhatsApp. Price from $ 22.700 COP before VAT.
| Family | Fire protection systems |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
The Low-Temperature Upright Fire Sprinkler from TECTUL is a fluid handling valve designed to discharge water automatically when the thermal element reaches its activation condition. It is selected by size, material, connection, flow direction, chemical compatibility and function within the system. In this product the base material is metallic component with heat-sensitive element and the technical purchasing criterion is selection according to the approved fire protection network design. It differs from the high-temperature upright sprinkler by the thermal classification requested for the protected environment. For an industrial quotation, it is advisable to indicate the exact size, the fluid, whether the line works in suction, discharge, pressure, steam, gas, air or water, and whether the installation requires thread, fusion, welding, sanitary connection or panel mounting. TECTUL focuses this reference for buyers who need availability by size, responsible selection and technical support before installation.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the low-temperature upright fire sprinkler, indicating size, quantity, fluid and connection type to confirm availability and price.
The price depends on size, connection, quantity and availability. Write to TECTUL with the fluid and application to quote the correct reference.
Both are upright, but they are selected by operating temperature of the environment and fire protection design criteria; they should not be interchanged only by price.
Install it only according to fire protection network drawings and with the proper tool to avoid damaging the thermal element.
Indicate size, quantity, fluid, system working pressure, temperature, required connection and whether the valve will be for shutoff, check, regulation or safety.
No. Compatibility depends on the body, seals, gaskets, temperature, fluid cleanliness and actual operating conditions.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Grooved Mechanical Tee
High-Temperature Upright Fire Sprinkler
High Temperature Pendent Fire Sprinkler
Low Response Pendent Fire Sprinkler
Rigid Grooved CouplingUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
