Cold Weld for Copper is a product in the pipe sealing and joining family for fluid conduction in copper. 1 size published with per-variant price and availability. Price from $ 46.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-266053-01 | 36 ml | $ 46.000 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe sealing and joining |
| Material | Cobre |
| Connection | Other |
| Availability | In stock |
Cold weld for copper is a two-part epoxy adhesive (resin plus hardener) that joins and seals copper parts without flame or flux. The lot presentation is 36 ml. In this product type, initial set takes 4 to 6 hours and full cure 15 to 24 hours at room temperature.
| Feature | Specification |
|---|---|
| Product type | Two-part epoxy adhesive (resin + hardener) |
| Lot presentation | 36 ml |
| Initial set (type) | 4 to 6 hours at room temperature |
| Full cure (type) | 15 to 24 hours |
| Heat resistance (per formula) | Reference formulas of the type, such as J-B Weld Original, declare service up to 287 °C (550 °F) — confirm lot brand and data sheet when quoting |
| Use limit | Does not replace the capillary soldered joint per ASTM B828 with ASME B16.22-2021 fittings on pressurized copper lines |
| Lot brand | Confirm when quoting |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
On pressurized copper lines, cold weld does not replace the soldered joint: pressure fittings are manufactured per ASME B16.22-2021 and the joint is executed per ASTM B828. The epoxy applies to minor repairs, pore sealing and low-demand assemblies, always verifying the data sheet of the lot brand.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this cold weld for copper indicating quantity, application and whether you require the data sheet, to confirm availability and price.
In products of this type, initial set takes 4 to 6 hours and full cure 15 to 24 hours at room temperature; do not pressurize or load the part before full cure. Confirm exact times on the lot brand data sheet.
Not as a substitute for the soldered joint: pressure joints in copper are executed with fittings per ASME B16.22-2021 and capillary joint per ASTM B828. The epoxy applies to minor repairs and low-demand sealing per the manufacturer data sheet.
It depends on the formula: reference epoxies of the type, such as J-B Weld Original, declare service up to 287 °C (550 °F). Lot brand and data sheet are confirmed when quoting.
The price depends on presentation (36 ml lot), available brand and quantity. TECTUL quotes per unit and sends the data sheet when the project requires it.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Eterna A 53 Sealant - Efficiency and Resistance
Liquid Teflon for High Temperatures - Durable Sealing
Industrial Teflon Tape for Sealing and Plumbing
PVC Solvent Cement
Yellow Teflon Tape for GasUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
