UCT Take-Up Bearing Unit groups 11 references as housed self-aligning insert units for direct shaft mounting. It spans eje (shaft) 25 to 85 mm. Available in CBR, FAG. Nominal dimensions per ISO 3228 · JIS B 1559. No online price: quoted via WhatsApp with the exact reference.
Pick your references in the table (Add) or send us the exact designation with its suffixes — a technical advisor confirms brand, price and lead time the same business day.
| Reference | Brand | eje (shaft) (mm) | Insert | Qty | ||
|---|---|---|---|---|---|---|
| UCT2 06-18 | CBR | 1-1/8" | UC206 | |||
| UCT205 | CBR | 25 | UC205 | |||
| UCT205-15 | CBR | 15/16" | UC205 | |||
| UCT207-20 | CBR | 1-1/4" | UC207 | |||
| UCT210-J7 | FAG | 50 | UC210 | |||
| UCT211-32 | CBR | 2" | UC211 | |||
| UCT211-32-J7 | FAG | 2" | UC211 | |||
| UCT211-J7 | FAG | 55 | UC211 | |||
| UCT212 | FAG | 60 | UC212 | |||
| UCT213-40 | CBR | 2-1/2" | UC213 | |||
| UCT217-J7 | FAG | 85 | UC217 |
“—” = dimension being verified against manufacturer tables. Nominal values; they are not a batch certificate. Availability is confirmed in the formal quote.
The UCT take-up bearing unit is a unit designed to work in take-up frames, guides or systems where the shaft must move to adjust tension in belts, chains or conveyors. It integrates insert and sliding housing, allowing longitudinal adjustment within the corresponding support. In this sheet TECTUL groups the UCT series under ISO 3228 dimensional criteria, with metric and inch references from the actual lot. It differs from a UCP because it is not intended as a fixed base pedestal, but as a component for tensioning and position compensation. It also differs from UCFL or UCF because it does not use a wall flange: its main function is to allow mechanical adjustment of the shaft within a take-up assembly.
| Actual lot data | Information |
|---|---|
| Covered series | chumacera-tensora-UCT |
| Dimensional standard | ISO 3228 |
| Available references | 11 |
| Shaft range | shaft 25-85 mm (and inch sizes) |
| Top references | UCT207-20, UCT217-J7, UCT2 06-18, UCT205, UCT205-15, UCT210-J7, UCT211-32, UCT211-32-J7 |
| Commercial unit | quote by reference |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your UCT take-up bearing unit with complete code or shaft size to validate the correct reference.
It is quoted by reference, shaft diameter and availability. TECTUL does not publish generic prices; request a quote via WhatsApp with the UCT code.
UCP is a fixed pillow block bearing unit. UCT is a take-up unit and works in a frame or guide to adjust shaft position.
It is mounted inside the compatible take-up frame, the shaft is positioned, system tension is adjusted and the assembly is locked without forcing alignment.
It includes UCT207-20, UCT217-J7, UCT2 06-18, UCT205, UCT205-15, UCT210-J7, UCT211-32 and UCT211-32-J7.
Yes, it is a common application when the system needs tension adjustment. Selection depends on shaft, load and take-up frame.
Not directly. UCFL is a fixed two-bolt flange unit; UCT is designed for movement and tension adjustment.
