Bronze Flat Washer Ap. Bro

Bronze flat washer is a TECTUL reference for distributing load in joints where non-ferrous material, compatibility with bronze or brass parts, relatively low sparking or decorative finish is required. Its function should be read from the washer type: flat washers distribute load and protect the surface, split lock washers help retain tightening, toothed washers bite into the bearing face, and sealing washers work by deformation or compression. In this product the main material is bronze or brass and the technical family is flat washer for inch threads. It differs because it uses bronze or brass and not carbon steel, so it is selected more for material compatibility than for structural strength. To quote without errors, report size, quantity, bolt or nut type, working environment, required finish and whether the purchase will be by unit or by kilo. We do not recommend substituting with a similar part if the drawing requires ASTM F436/F436M, 316 stainless steel, a specific gauge, hot-dip galvanized finish or a special reference.

Installation recommendations

• Tighten gradually to avoid marking soft surfaces and validate compatibility with the base part metal.
• Select the size by the bolt's actual diameter, not only by appearance or by the washer outside diameter.
• Remove burrs, rust, loose paint or dirt from the bearing face before tightening.
• Do not stack washers to correct length or misalignment; use the correct bolt size or spacer.
• Inspect the assembly after initial installation if there is vibration or settling of paint, wood, rubber or thin sheet.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this bronze flat washer, indicating size, quantity, finish and application to confirm availability and price.