Closed eye bolt # in carbon steel, inch thread. 10 sizes available; sold per unit.
| SKU | Size | Price | Status | Qty | |
|---|---|---|---|---|---|
| VT-4975 | 00 | $ 42 | In stock | ||
| VT-4976 | 0 | $ 59 | In stock | ||
| VT-4977 | 2 | $ 71 | In stock | ||
| VT-4978 | 4 | $ 132 | In stock | ||
| VT-4979 | 6 | $ 169 | In stock | ||
| VT-4980 | 8 | $ 226 | In stock | ||
| VT-4981 | 10 | $ 280 | In stock | ||
| VT-4982 | 12 | $ 385 | In stock | ||
| VT-4983 | 14 | $ 490 | In stock | ||
| VT-4984 | 16 | $ 736 | In stock |
Prices per unit, before VAT. Availability is confirmed in the formal quote.
| Material | acero al carbono |
| Thread system | pulgadas |
| Family | Eye bolts & rings |
The closed eye bolt # is a threaded carbon steel eye screw for fastening points where greater retention of the connected accessory is required. Its closed eye helps keep wire, light chains, cords, turnbuckles or hooks inside the tie-down point, provided the installation is compatible and it is not used for certified lifting. Compared with an open eye bolt, this reference sacrifices quick hook-up to improve containment; compared with a body ring, it is normally selected by commercial number and for more general fastening use. The inch thread allows installation in wood, prepared supports or parts with a compatible hole, depending on the case. To buy correctly, identify the required number, check the available eye clearance and confirm that the load direction will not cause opening, twisting or thread loosening.
| Material | Standard / thread | Unit | Available numbers |
|---|---|---|---|
| Carbon steel | Inch thread | Unit | 00, 0, 2, 4, 6, 8, 10, 12, 14, 16 |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the closed eye bolt # with number, quantity and fastening application.
The price depends on the number and quantity. TECTUL quotes per unit and confirms availability by reference.
The closed eye better retains the connected accessory; the open eye allows easier hook-up and removal.
It is installed by threading it into the prepared support until firm, with the eye aligned to the direction of the accessory it will hold.
The reference is handled by commercial numbering; the number helps identify the relative size of the eye bolt within the family.
It can work as a light fastening point if the base material, accessory and load direction are suitable.
No. A body ring is usually used as a tie-down point with through mounting; the closed eye bolt is installed as a threaded eye screw.
Updated: July 22, 2026
