304-A2 Stainless Steel Metric Slotted/Phillips Flat Head Machine Screw

304-A2 Stainless Steel Metric Slotted/Phillips Flat Head Machine Screw is a TECTUL reference for metric assemblies where a stainless flat head and either flat-blade or Phillips screwdriver flexibility are required. The actual lot reports 304-A2 stainless steel material, sold by unit, and metric thread family; in the technical sheet it is separated by dual slotted and Phillips drive, metric thread, and 304-A2 stainless steel. To buy without errors, validate head, drive, diameter or pitch, usable length, and finish against the sample, drawing, or existing nut. ASME B18.6.3 is used as a public reference for inch machine screws; metric items are checked against ISO or DIN when required by the drawing. We do not publish a single torque or capacity because the result depends on base material, thickness, lubrication, coating, head bearing, vibration, grip length, and tightening method.

Installation recommendations

• Thread by hand first to confirm that the pitch matches; if it binds, do not force the installation.
• Confirm the complete size before installation; a visually similar thread can damage the nut or the part.
• Use a bit, socket, or screwdriver in good condition to avoid stripping the head or marking the finish.
• Do not substitute zinc-plated steel, stainless steel, or brass/bronze without validating environment, corrosion, and assembly compatibility.
• Tighten in a controlled way so the head seats without deforming the part or damaging the internal thread.

We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for this 304-A2 stainless steel metric slotted/Phillips flat head machine screw indicating size, quantity, finish, delivery city, and a photo if you are replacing a sample.