Zinc-Plated Phillips Pan Head Machine Screw

Zinc-Plated Phillips Pan Head Machine Screw is a TECTUL reference for assemblies with nut or internal thread in equipment, covers, cabinets, and general maintenance. The actual lot reports carbon steel material, sold by unit, and zinc-plated inch thread family; in the technical sheet it is separated by zinc-plated Phillips pan head and machine-thread screw designation. To buy without errors, validate head, drive, diameter or pitch, usable length, and finish against the sample, drawing, or existing nut. ASME B18.6.3 is used as a public reference for inch machine screws; metric items are checked against ISO or DIN when required by the drawing. We do not publish a single torque or capacity because the result depends on base material, thickness, lubrication, coating, head bearing, vibration, grip length, and tightening method.

Installation recommendations

• Thread by hand first to confirm that the pitch matches; if it binds, do not force the installation.
• Confirm the complete size before installation; a visually similar thread can damage the nut or the part.
• Use a bit, socket, or screwdriver in good condition to avoid stripping the head or marking the finish.
• Do not substitute zinc-plated steel, stainless steel, or brass/bronze without validating environment, corrosion, and assembly compatibility.
• Tighten in a controlled way so the head seats without deforming the part or damaging the internal thread.

We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for this zinc-plated Phillips pan head machine screw indicating size, quantity, finish, delivery city, and a photo if you are replacing a sample.