M10 Yellow Zinc-Plated Metric Phillips Flat Head Machine Screw

M10 Yellow Zinc-Plated Metric Phillips Flat Head Machine Screw is a TECTUL reference for equipment, housings, mechanical assemblies, and maintenance requiring a flat head with metric thread. The actual lot reports carbon steel material, sold by unit, and metric thread family; in the technical sheet it is separated by M10 diameter, 1.50 pitch, Phillips flat head, and yellow zinc-plated finish. To buy without errors, validate head, drive, diameter or pitch, usable length, and finish against the sample, drawing, or existing nut. For metric thread, diameter, pitch, and length are validated against the drawing; ISO or DIN references apply when required by the specification. We do not publish a single torque or capacity because the result depends on base material, thickness, lubrication, coating, head bearing, vibration, grip length, and tightening method.

Installation recommendations

• Thread by hand first to confirm that the pitch matches; if it binds, do not force the installation.
• Confirm the complete size before installation; a visually similar thread can damage the nut or the part.
• Use a bit, socket, or screwdriver in good condition to avoid stripping the head or marking the finish.
• Do not substitute zinc-plated steel, stainless steel, or brass/bronze without validating environment, corrosion, and assembly compatibility.
• Tighten in a controlled way so the head seats without deforming the part or damaging the internal thread.

We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for this M10 yellow zinc-plated metric Phillips flat head machine screw indicating size, quantity, finish, delivery city, and a photo if you are replacing a sample.