Hex Bolt ASTM A-325 Grade 5 Gal Cte A325 Galvanized 3/4 x in carbon steel, galvanized, A325, inch thread. 9 sizes available; sold per unit.
| SKU | Size | Price | Status | Qty | |
|---|---|---|---|---|---|
| VT-7877 | 1 x 1/4 | $ 3.402 | In stock | ||
| VT-7878 | 1 x 1/2 | $ 3.067 | In stock | ||
| VT-7879 | 1 x 3/4 | $ 3.356 | In stock | ||
| VT-7881 | 2 x 1/4 | $ 4.299 | In stock | ||
| VT-7882 | 2 x 1/2 | $ 5.002 | In stock | ||
| VT-7883 | 2 x 3/4 | $ 4.930 | In stock | ||
| VT-7885 | 3 x 1/4 | $ 5.099 | In stock | ||
| VT-7886 | 3 x 1/2 | $ 5.875 | In stock | ||
| VT-7887 | 3 x 3/4 | $ 6.145 | In stock |
Prices per unit, before VAT. Availability is confirmed in the formal quote.
| Material | acero al carbono |
| Finish | galvanizado |
| Grade / Standard | A325 |
| Thread system | pulgadas |
| Family | Hex bolts |
Structural bolt ASTM A325 galvanized 3/4is a hex head bolt for structural connections of steel with nut and washer, especialmente where the proyecto pide perno heavy A325 galvanized. At TECTUL it is quoted per unit and by actual available size, cross-checking diameter, length, pitch, material and standard before confirming price. This reference is differentiated by A325 of 3/4 inch-thread, not a bolt metric 8.8 or A490 black; therefore, it should not be replaced with a similar related item only because it has a hex head. The material reported for the lot is carbon steel with finish galvanized in hot-dip. For class 8.8 and 10.9, selection is based on ISO 898-1 as the reference for mechanical properties; for DIN 933, DIN 960 or DIN 961, full, partial or fine thread geometry is validated against the drawing. For ASTM A325, A490 or A394 bolts, the project standard defines the bolt, nut, washer and assembly. We do not publish single load or torque values because they depend on lubrication, nut, washer, thread condition, grip length and engineering criteria.
| Reported actual size | Family diameter | Pitch or thread | Sale |
|---|---|---|---|
| 1 x 1/2 | 3/4" | inch thread | unit |
| 1 x 1/4 | 3/4" | inch thread | unit |
| 1 x 3/4 | 3/4" | inch thread | unit |
| 2 x 1/2 | 3/4" | inch thread | unit |
| 2 x 1/4 | 3/4" | inch thread | unit |
| 2 x 3/4 | 3/4" | inch thread | unit |
| 3 x 1/2 | 3/4" | inch thread | unit |
| 3 x 1/4 | 3/4" | inch thread | unit |
| 3 x 3/4 | 3/4" | inch thread | unit |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this structural bolt astm a325 galvanized 3/4, indicating size, quantity, pitch, finish and whether you need a compatible nut or washer.
The price depends on size, length, quantity, finish, standard and availability. TECTUL quotes per unit with the exact size requested.
Both are galvanized A325; the critical difference is the diameter. Do not change 3/4 to 5/8 without reviewing the drawing, hole size, washer and joint specification.
It is installed with nuts and washers compatible with the project standard, controlling alignment, grip length and the tightening method defined by engineering.
Send diameter, length, pitch or thread, quantity, material, finish, required standard and a photo or drawing if you are replacing an existing reference.
The sale is handled per bolt unit unless the quotation specifies a set. Indicate whether you need a nut, flat washer, lock washer or structural set.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Updated: July 22, 2026
