Hex Bolt ASTM A 394 0 Hot-Dip Galv. 7/8 x in carbon steel, inch thread. 5 sizes available; sold per unit.
| SKU | Size | Price | Status | Qty | |
|---|---|---|---|---|---|
| VT-8292 | 2 x 1/4 | $ 6.799 | In stock | ||
| VT-8293 | 2 x 1/2 | $ 7.324 | In stock | ||
| VT-8294 | 2 x 3/4 | $ 7.845 | In stock | ||
| VT-8296 | 3 x 1/2 | $ 9.459 | In stock | ||
| VT-8658 | 4 x 1/2 | $ 10.639 | In stock |
Prices per unit, before VAT. Availability is confirmed in the formal quote.
| Material | acero al carbono |
| Thread system | pulgadas |
| Family | Hex bolts |
ASTM A394 galvanized 7/8 bolt is a hex head bolt for towers, hardware and galvanized structures where the drawing calls for ASTM A394 fasteners. At TECTUL it is quoted per unit and by actual available size, cross-checking diameter, length, pitch, material, finish and standard before confirming price. This reference is differentiated by A394 standard, galvanizing and 7/8 diameter; it is not heavy structural A325. The material reported for the lot is carbon steel with galvanized finish. For class 8.8, 10.9 and SAE grades, selection must respect the requested mechanical property; for DIN 933, DIN 931, DIN 960 or DIN 961, full, partial, standard or fine thread geometry is validated according to the drawing. For ASTM A325, A490 or A394, the project standard defines bolt, nut, washer and assembly. We do not publish single torque or load values because they depend on lubrication, coating, grip length, thread condition and engineering criteria.
| Reported actual size | Family diameter | Pitch or thread | Sale |
|---|---|---|---|
| 2 x 1/2 | 7/8" | inch thread | unit |
| 2 x 1/4 | 7/8" | inch thread | unit |
| 2 x 3/4 | 7/8" | inch thread | unit |
| 3 x 1/2 | 7/8" | inch thread | unit |
| 4 x 1/2 | 7/8" | inch thread | unit |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this astm a394 galvanized 7/8 bolt, indicating size, quantity, pitch, finish and whether you need a compatible nut or washer.
The price depends on size, length, quantity, finish, standard and availability. TECTUL quotes per unit with the exact reference requested.
A394 and A325 may match in diameter and finish, but they follow different specifications. The drawing standard defines which one to use.
It is installed with nuts and washers compatible with the project standard, controlling alignment, grip length and the tightening method defined by engineering.
Send diameter, length, pitch or thread, quantity, material, finish, required standard and a photo or drawing if you are replacing an existing reference.
The sale is handled per bolt unit unless the quotation specifies a set. Indicate whether you need a nut, flat washer, lock washer or structural set.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Updated: July 22, 2026
