Hex Bolt G1 Hot-Dip Galv in carbon steel, galvanized, Grade 1, inch thread. 7 sizes available; sold per unit.
| SKU | Size | Price | Status | Qty | |
|---|---|---|---|---|---|
| VT-7366 | 5/8 X 8 | $ 7.251 | In stock | ||
| VT-7367 | 5/8 X 10 | $ 11.382 | In stock | ||
| VT-7376 | 5/8 X 12 | $ 12.748 | In stock | ||
| VT-7368 | 5/8 X 14 | $ 15.572 | In stock | ||
| VT-7369 | 5/8 X 16 | $ 25.912 | In stock | ||
| VT-7370 | 5/8 X 18 | $ 29.150 | In stock | ||
| VT-7371 | 5/8 X 20 | $ 32.393 | In stock |
Prices per unit, before VAT. Availability is confirmed in the formal quote.
| Material | acero al carbono |
| Finish | galvanizado |
| Grade / Standard | Grado 1 |
| Thread system | pulgadas |
| Family | Hex bolts |
Hex bolt grade 1 galvanized in hot-dip 5/8is a hex head bolt for assemblies light-duty, enclosures, supports and maintenance where priority is given to galvanized in hot-dip sobre alta strength. At TECTUL it is quoted per unit and by actual available size, cross-checking diameter, length, pitch, material and standard before confirming price. This reference is differentiated by grade 1 galvanized in hot-dip, not grade 5 galvanized or A325; therefore, it should not be replaced with a similar related item only because it has a hex head. The material reported for the lot is carbon steel galvanized in hot-dip. For class 8.8 and 10.9, selection is based on ISO 898-1 as the reference for mechanical properties; for DIN 933, DIN 960 or DIN 961, full, partial or fine thread geometry is validated against the drawing. For ASTM A325, A490 or A394 bolts, the project standard defines the bolt, nut, washer and assembly. We do not publish single load or torque values because they depend on lubrication, nut, washer, thread condition, grip length and engineering criteria.
| Reported actual size | Family diameter | Pitch or thread | Sale |
|---|---|---|---|
| 5/8 X 10 | 5/8" | UNC | unit |
| 5/8 X 12 | 5/8" | UNC | unit |
| 5/8 X 14 | 5/8" | UNC | unit |
| 5/8 X 16 | 5/8" | UNC | unit |
| 5/8 X 18 | 5/8" | UNC | unit |
| 5/8 X 20 | 5/8" | UNC | unit |
| 5/8 X 8 | 5/8" | UNC | unit |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this hex bolt grade 1 galvanized in hot-dip 5/8, indicating size, quantity, pitch, finish and whether you need a compatible nut or washer.
The price depends on size, length, quantity, finish, standard and availability. TECTUL quotes per unit with the exact size requested.
El grade 5 tiene higher strength mechanical; the grade 1 uses in joints livianas cuando the design does does not require alta strength.
It is installed by verifying diameter, pitch, usable length, compatible nut and assembly torque according to the equipment or drawing. Do not force a thread that does not start freely.
Send diameter, length, pitch or thread, quantity, material, finish, required standard and a photo or drawing if you are replacing an existing reference.
The sale is handled per bolt unit unless the quotation specifies a set. Indicate whether you need a nut, flat washer, lock washer or structural set.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Updated: July 22, 2026
