TECTULby IMR
Home › Fasteners & Anchors › Hex bolts › Hex Bolt Grade 5 UNC Gal Cte Ao5 Galv-clte

Hex Bolt Grade 5 UNC Gal Cte Ao5 Galv-clte

Hex Bolt Grade 5 UNC Gal Cte Ao5 Galv-clte in carbon steel, galvanized, Grade 5, inch thread. 67 sizes available; sold per unit.

Price from
$ 1.129
Material
acero al carbono
Grade
Grado 5
Sizes
67
Hex Bolt Grade 5 UNC Gal Cte Ao5 Galv-clte
In stock acero al carbono galvanizado Grado 5 pulgadas
Price from
$ 1.129 COP each
+ 19% VAT · per unit
Quote via WhatsApp

01Sizes, prices and availability

SKUSizePriceStatusQty
VT-11735 1/2 X 3/4 $ 1.129 In stock
VT-11736 1/2 X 1 $ 1.144 In stock
VT-11737 1/2 X 1.1/4 $ 1.191 In stock
VT-11738 1/2 X 1.1/2 $ 1.525 In stock
VT-11739 1/2 X 1.3/4 $ 1.696 In stock
VT-11740 1/2 X 2 $ 1.941 In stock
VT-11741 1/2 X 2.1/4 $ 1.986 In stock
VT-11742 1/2 X 2.1/2 $ 2.038 In stock
VT-11743 1/2 X 3 $ 2.162 In stock
VT-11744 1/2 X 3.1/2 $ 2.276 In stock
VT-11745 1/2 X 4 $ 3.964 In stock
VT-11746 1/2 X 4.1/2 $ 4.920 In stock
VT-11747 1/2 X 5 $ 3.873 In stock
VT-11748 5/8 X 1 $ 1.916 In stock
VT-11749 5/8 X 1.1/4 $ 2.359 In stock
VT-11750 5/8 X 1.1/2 $ 2.400 In stock
VT-11751 5/8 X 2 $ 3.485 In stock
VT-11752 5/8 X 2.1/2 $ 3.065 In stock
VT-11753 5/8 X 3 $ 3.959 In stock
VT-11754 5/8 X 3.1/2 $ 4.499 In stock
VT-11755 5/8 X 4 $ 5.696 In stock
VT-11756 5/8 X 4.1/2 $ 6.310 In stock
VT-11757 5/8 X 5 $ 6.924 In stock
VT-11758 5/8 X 5.1/2 $ 7.536 In stock
VT-11759 5/8 X 6 $ 7.819 In stock
VT-11760 3/4 X 1.1/4 $ 3.656 In stock
VT-11761 3/4 X 1.1/2 $ 4.005 In stock
VT-11762 3/4 X 2 $ 4.738 In stock
VT-11763 3/4 X 2.1/2 $ 5.409 In stock
VT-11764 3/4 X 3 $ 6.214 In stock
VT-11765 3/4 X 3.1/2 $ 6.226 In stock
VT-11766 3/4 X 4 $ 7.696 In stock
VT-11767 3/4 X 4.1/2 $ 8.336 In stock
VT-11768 3/4 X 5 $ 10.057 In stock
VT-11769 3/4 X 5.1/2 $ 10.468 In stock
VT-11770 3/4 X 6 $ 11.757 In stock
VT-11771 3/4 X 6.1/2 $ 12.126 In stock
VT-11772 3/4 X 7 $ 12.954 In stock
VT-11773 3/4 X 8 $ 15.827 In stock
VT-11775 7/8 X 1.1/2 $ 7.286 In stock
VT-11776 7/8 X 2 $ 8.472 In stock
VT-11777 7/8 X 2.1/2 $ 9.820 In stock
VT-11778 7/8 X 3 $ 11.223 In stock
VT-11779 7/8 X 3.1/2 $ 14.111 In stock
VT-11780 7/8 X 4 $ 15.680 In stock
VT-11781 7/8 X 4.1/2 $ 15.436 In stock
VT-11782 7/8 X 5 $ 16.839 In stock
VT-11783 7/8 X 5.1/2 $ 18.242 In stock
VT-11784 7/8 X 6 $ 19.643 In stock
VT-11785 7/8 X 6.1/2 $ 21.046 In stock
VT-11786 7/8 X 7 $ 25.092 In stock
VT-11787 7/8 X 8 $ 25.253 In stock
VT-11788 1 X 1.1/2 $ 10.700 In stock
VT-11789 1 X 2 $ 12.351 In stock
VT-11790 1 X 2.1/2 $ 15.726 In stock
VT-11791 1 X 3 $ 16.016 In stock
VT-11792 1 X 3.1/2 $ 16.348 In stock
VT-11793 1 X 4 $ 18.589 In stock
VT-11794 1 X 4.1/2 $ 17.076 In stock
VT-11795 1 X 5 $ 23.358 In stock
VT-11796 1 X 5.1/2 $ 25.735 In stock
VT-11797 1 X 6 $ 27.681 In stock
VT-11798 1 X 6.1/2 $ 29.623 In stock
VT-11799 1 X 7 $ 28.736 In stock
VT-11800 1 X 8 $ 35.459 In stock
VT-11801 1 X 9 $ 39.352 In stock
VT-11802 1 X 10 $ 43.244 In stock

Prices per unit, before VAT. Availability is confirmed in the formal quote.

Can't find your reference? Need another size, grade or finish of this fastener? We carry over 12,000 references — we quote it via WhatsApp. Quote via WhatsApp

02Specifications

Materialacero al carbono
Finishgalvanizado
Grade / StandardGrado 5
Thread systempulgadas
FamilyHex bolts

03Technical description

The Hex Bolt Grade 5 UNC Hot-Dip Galvanized is a hex head bolt for wrench tightening, used in industrial maintenance, machinery and medium-duty inch-thread joints. TECTUL offers it in carbon steel, with UNC inch thread and Grade 5 specification associated with SAE J429. Correct selection depends on diameter, length, thread pitch, finish, compatible nut and actual service condition. The hot-dip galvanized finish differentiates it from black, zinc-plated or stainless references in the same family. In industrial purchasing, validate whether the drawing requires full or partial thread, whether the assembly works under vibration, whether there will be outdoor exposure and whether a material certificate or lot traceability is required.

Available sizeSale
1 X 1.1/2unit
1 X 10unit
1 X 2unit
1 X 2.1/2unit
1 X 3unit
1 X 3.1/2unit
1 X 4unit
1 X 4.1/2unit
1 X 5unit
1 X 5.1/2unit
1 X 6unit
1 X 6.1/2unit
1 X 7unit
1 X 8unit
1 X 9unit
1/2 X 1unit
1/2 X 1.1/2unit
1/2 X 1.1/4unit
1/2 X 1.3/4unit
1/2 X 2unit
1/2 X 2.1/2unit
1/2 X 2.1/4unit
1/2 X 3unit
1/2 X 3.1/2unit

Installation recommendations

  • Confirm that the nut and washer match the same thread system, grade and finish as the bolt.
  • Clean the threads before installation and avoid forcing thread start when there is misalignment.
  • Apply the torque defined by the designer, the installation procedure or the project standard; do not use a generic value without validating lubrication and surface condition.
  • In humid or outdoor environments, check whether the black finish requires additional protection or whether zinc-plated, galvanized or stainless steel is suitable.
  • When the joint is structural or critical, do not substitute grade, standard or length without technical approval.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the Hex Bolt Grade 5 UNC Hot-Dip Galvanized, indicating size, quantity, required finish and whether you need nut, washer or certificate for technical purchasing.

04Frequently asked questions

What is the price of hex bolt grade 5 unc hot dip galvanized price?

The price depends on size, quantity, finish, availability and whether a certificate is required. Send us the reference or drawing and TECTUL quotes per unit for national dispatch.

How does this bolt differ from a similar reference?

The main difference is grade or class, thread system, finish and application. They should not be replaced without reviewing the drawing, compatible nut and mechanical demand.

How is the Hex Bolt Grade 5 UNC Hot-Dip Galvanized installed?

It is installed with a wrench or hex socket, using compatible nut and washer. The surface must be aligned and torque must come from the installation procedure or design.

Is it sold per unit or per box?

The commercial unit for this lot is per unit. For repeat purchases or high quantities, packaging, availability and dispatch times can be quoted.

What information should I send to quote?

Indicate diameter, length, thread pitch, grade or standard, finish, quantity, delivery city and whether the joint requires certificate or traceability.

Is it suitable for outdoor or corrosive environments?

It depends on the finish and the environment. For outdoor exposure or corrosion, galvanized, zinc-plated, stainless steel or another project-defined protection must be evaluated.

05Related products

Hex Bolt Grade 5 UNC Black Ao5Hex Bolt Grade 8 UNC Black Ao8Hex Bolt Grade 5 UNF Black Af5Hex Bolt Grade 8 UNF Black Af8Hex Bolt G2 UNC Zinc-Plated Ao2 ZincHex Bolt G2 UNC Black Ao2

Updated: July 22, 2026

Note. Per-unit prices before VAT, subject to confirmation in the formal quote. Dimensions and grades are nominal per each product's standard; verify your project specification before buying.