Hex Bolt Metric 8.8 Fine Pitch Din961 8.8 Pitch 1.00 in carbon steel, 8.8, metric thread. 9 sizes available; sold per unit.
| SKU | Size | Price | Status | Qty | |
|---|---|---|---|---|---|
| VT-13932 | 7 X 10 P 1.00 | $ 159 | In stock | ||
| VT-13933 | 7 X 12 P 1.00 | $ 189 | In stock | ||
| VT-13934 | 7 X 16 P 1.00 | $ 192 | In stock | ||
| VT-13935 | 7 X 20 P 1.00 | $ 216 | In stock | ||
| VT-13936 | 7 X 25 P 1.00 | $ 244 | In stock | ||
| VT-13937 | 7 X 30 P 1.00 | $ 276 | In stock | ||
| VT-13938 | 7 X 35 P 1.00 | $ 305 | In stock | ||
| VT-13939 | 7 X 40 P 1.00 | $ 337 | In stock | ||
| VT-13940 | 7 X 45 P 1.00 | $ 427 | In stock |
Prices per unit, before VAT. Availability is confirmed in the formal quote.
| Material | acero al carbono |
| Grade / Standard | 8.8 |
| Thread system | milimétrico |
| Family | Hex bolts |
Hex bolt M7 DIN 961 fine pitch 1.00 class 8.8is a hex head bolt for spare parts and assemblys special that usesn M7, a size menos common that M6, M8 or M10. At TECTUL it is quoted per unit and by actual available size, cross-checking diameter, length, pitch, material and standard before confirming price. This reference is differentiated by M7 pitch 1.00, not M8/M10 of the mismo pitch; therefore, it should not be replaced with a similar related item only because it has a hex head. The material reported for the lot is carbon steel. For class 8.8 and 10.9, selection is based on ISO 898-1 as the reference for mechanical properties; for DIN 933, DIN 960 or DIN 961, full, partial or fine thread geometry is validated against the drawing. For ASTM A325, A490 or A394 bolts, the project standard defines the bolt, nut, washer and assembly. We do not publish single load or torque values because they depend on lubrication, nut, washer, thread condition, grip length and engineering criteria.
| Reported actual size | Family diameter | Pitch or thread | Sale |
|---|---|---|---|
| 7 X 10 | M7 | 1.00 | unit |
| 7 X 12 | M7 | 1.00 | unit |
| 7 X 16 | M7 | 1.00 | unit |
| 7 X 20 | M7 | 1.00 | unit |
| 7 X 25 | M7 | 1.00 | unit |
| 7 X 30 | M7 | 1.00 | unit |
| 7 X 35 | M7 | 1.00 | unit |
| 7 X 40 | M7 | 1.00 | unit |
| 7 X 45 | M7 | 1.00 | unit |
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this hex bolt m7 din 961 fine pitch 1.00 class 8.8, indicating size, quantity, pitch, finish and whether you need a compatible nut or washer.
The price depends on size, length, quantity, finish, standard and availability. TECTUL quotes per unit with the exact size requested.
They share pitch 1.00 and DIN 961, but this page is differentiated by M7 diameter; the other covers M8 and M10.
It is installed by verifying diameter, pitch, usable length, compatible nut and assembly torque according to the equipment or drawing. Do not force a thread that does not start freely.
Send diameter, length, pitch or thread, quantity, material, finish, required standard and a photo or drawing if you are replacing an existing reference.
The sale is handled per bolt unit unless the quotation specifies a set. Indicate whether you need a nut, flat washer, lock washer or structural set.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Updated: July 22, 2026
