Hex Bolt Metric Stainless Steel 304-A2 DIN 933

Hex bolt stainless steel A2 DIN 933is a hex head bolt for equipments expuestos a humedad, lavado, moderately corrosive environments and assemblys where a hex head is required metric thread total. At TECTUL it is quoted per unit and by actual available size, cross-checking diameter, length, pitch, material and standard before confirming price. This reference is differentiated by steel stainless steel A2 with DIN 933 of full thread, different from stainless steel UNC inch thread; therefore, it should not be replaced with a similar related item only because it has a hex head. The material reported for the lot is steel stainless steel 304-A2. For class 8.8 and 10.9, selection is based on ISO 898-1 as the reference for mechanical properties; for DIN 933, DIN 960 or DIN 961, full, partial or fine thread geometry is validated against the drawing. For ASTM A325, A490 or A394 bolts, the project standard defines the bolt, nut, washer and assembly. We do not publish single load or torque values because they depend on lubrication, nut, washer, thread condition, grip length and engineering criteria.

Installation recommendations

• Avoid contamination with carbon steel during assembly; use clean tools and compatible nuts to reduce the risk of galling.
• Clean threads, holes and bearing surfaces before assembly to avoid false tightening.
• Do not mix metric thread with UNC or UNF; if in doubt, compare against a sample or drawing.
• Apply the torque or tightening method defined by engineering, considering lubrication and coating condition.
• Check grip length and remaining thread so the joint clamps on the parts, not on the thread end.

We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this hex bolt stainless steel a2 din 933, indicating size, quantity, pitch, finish and whether you need a compatible nut or washer.