Stainless Steel Phillips Pan Head Self-Drilling Sheet Metal Screw

stainless steel Phillips pan head self-drilling sheet metal screw is a TECTUL reference for sheet metal, cabinets, light roofing, and moisture-exposed equipment requiring drill point and Phillips drive. The actual lot reports material stainless steel, sale by unit and stainless steel, inch thread. It is distinguished by the stainless Phillips pan head with drill point; it is not hex head or zinc-plated references. To select without errors, validate head style, drive, finish, commercial diameter, and length against the sample or drawing. The drill point avoids pre-drilling when the gauge and base material are compatible; validate with an on-site test. We do not publish a single torque or capacity because the result depends on base material, thickness, hole preparation, lubrication, coating, head bearing, vibration, and tightening method.

Installation recommendations

• Test on the actual sheet gauge before production; the drill point must cut without slipping.
• Confirm diameter and length before installation; a similar size can damage the thread or leave insufficient fastening.
• Use a bit, socket, or driver in good condition to avoid stripping the head or marking the finish.
• Do not substitute zinc-plated, black oxide, or stainless steel without validating moisture, washdown, or outdoor exposure.
• Avoid overtightening: it can strip the formed thread or deform the sealing washer.

We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for this stainless steel Phillips pan head self-drilling sheet metal screw indicating size, quantity, finish, delivery city, and a photo if you are replacing a sample.