Zinc-Plated Phillips Countersunk Sharp Point Construction Screw with Ribs in carbon steel, zinc-plated, inch thread. 6 sizes available; sold by unit.
| SKU | Size | Price | Status | Qty | |
|---|---|---|---|---|---|
| VT-385 | 6 X 3/4 | $ 24 | In stock | ||
| VT-386 | 6 X 7/8 | $ 31 | In stock | ||
| VT-387 | 6 X 1.1/8 | $ 33 | In stock | ||
| VT-388 | 6 X 1.1/4 | $ 33 | In stock | ||
| VT-389 | 7 X 1.1/4 | $ 40 | In stock | ||
| VT-390 | 7 X 1.1/2 | $ 49 | In stock |
Prices per unit, before VAT. Availability is confirmed in the formal quote.
| Material | acero al carbono |
| Finish | zincado |
| Thread system | pulgadas |
| Family | Sheet metal, wood & self-tapping screws |
The zinc-plated Phillips countersunk sharp point construction screw from TECTUL is a light construction screw in carbon steel, zinc-plated and with inch thread. The sharp point starts quickly in compatible substrates and the ribs under the head help the countersink seat with a better finish. It differs from the drill point version because it is not intended to drill metal by itself; the material must allow direct penetration or the passage must be prepared when applicable. It is a practical option for fastenings where flush head, quick bite, and purchase by unit in several actual lengths are required.
| Available sizes |
|---|
| 6 X 3/4 |
| 6 X 7/8 |
| 6 X 1.1/8 |
| 6 X 1.1/4 |
| 7 X 1.1/4 |
| 7 X 1.1/2 |
We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for the zinc-plated Phillips countersunk sharp point construction screw indicating size, quantity, and delivery city.
The price depends on size, quantity, and lot availability. Send the reference or required length via WhatsApp for an updated quote.
The actual sizes available for this product include 6 X 3/4, 6 X 7/8, 6 X 1.1/8, 6 X 1.1/4... Sold by unit.
This reference is distinguished by countersinking ribs and by the sizes listed on this page; do not substitute it without validating head, thread, material, and application.
Install with the compatible tool, aligning the screw with the part. Avoid over-tightening and validate the substrate before mounting large quantities.
It depends on the environment. Zinc plating is surface protection; for humidity, frequent washdown, or corrosive agents, evaluate stainless steel or another coating specified by engineering.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other Colombian cities depending on availability and transport conditions.
Updated: July 22, 2026
