Slotted or Phillips Flat Head Wood Screw by Gross

slotted or Phillips flat head wood screw by gross is a TECTUL reference for wood, carpentry, maintenance, and part fastening where the purchase is made by gross or quantity. The actual lot reports material carbon steel, sale by unit and inch wood thread. It is distinguished by the flat head wood-screw presentation with slotted or Phillips drive; it is not brass-finished or chipboard-specific references. To select without errors, validate head style, drive, finish, commercial diameter, and length against the sample or drawing. ASME B18.6.1 is a public reference for wood screws in inch sizes; installation is validated with the pilot hole and base material. We do not publish a single torque or capacity because the result depends on base material, thickness, hole preparation, lubrication, coating, head bearing, vibration, and tightening method.

Installation recommendations

• Drill a pilot hole when the wood is hard, near the edge, or the size is large.
• Confirm diameter and length before installation; a similar size can damage the thread or leave insufficient fastening.
• Use a bit, socket, or driver in good condition to avoid stripping the head or marking the finish.
• Do not substitute zinc-plated, black oxide, or stainless steel without validating moisture, washdown, or outdoor exposure.
• Tighten to a firm seat without splitting the wood or sinking the head excessively.

We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp for this slotted or Phillips flat head wood screw by gross indicating size, quantity, finish, delivery city, and a photo if you are replacing a sample.