201 stainless steel sheet with #4 satin polish and protective film, for decorative work and furniture where budget is the priority. 3 size variants published, thicknesses 0.7 to 1.2 mm, with per-unit prices before VAT.
| SKU | Size | Thickness | Price | Qty | |
|---|---|---|---|---|---|
| VT-lamina-inoxidable-201--01 | 0,7 mm × 1219 × 2438 | 0.7 mm | $ 152.344 | ||
| VT-lamina-inoxidable-201--02 | 0,9 mm × 1219 × 2438 | 0.9 mm | $ 195.844 | ||
| VT-lamina-inoxidable-201--03 | 1,2 mm × 1219 × 2438 | 1.2 mm | $ 261.094 |
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
| Family | Stainless steel sheets & plates |
| Alloy | AISI 201 |
| Finish | #4 finish (PE film) |
| Shape | Sheet |
| Variants | 3 |
| Availability | In stock |
The 201 stainless steel sheet #4 PE finish is a satin sheet with protective film, intended for interior projects where a stainless steel appearance is required with controlled cost. It is used in furniture, panels, cladding, displays, doors, cabinets, and decorative pieces that will not be subjected to severe corrosive environments. The #4 finish is a directional satin polish, while the PE film protects the visible face during cutting, bending, and transport. Compared with 304 #4 PE sheet, the critical difference is the material: 201 can work in decorative applications and dry environments, but it must not be treated as equivalent to 304 under frequent washing, chemical exposure, or demanding outdoor service. For stainless flat finishes, ASTM A480 is a useful technical reference for nomenclature and general requirements.
| Material | Finish | Available size | Unit |
|---|---|---|---|
| AISI 201 | #4 PE | 0,70 mm x 1219 x 2438 | unit |
| AISI 201 | #4 PE | 0,90 mm x 1219 x 2438 | unit |
| AISI 201 | #4 PE | 1,20 mm x 1219 x 2438 | unit |
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
TECTUL supplies 201 stainless steel #4 PE sheet for interior fabrication, furniture, and cladding. We dispatch to Bogotá, Medellín, Cali, Barranquilla, and all of Colombia. Request a quote via WhatsApp with size and quantity.
It depends on thickness, quantity, and availability. TECTUL quotes by unit and confirms nationwide dispatch.
201 #4 PE is more cost- and interior-oriented. 304 #4 PE offers better corrosion resistance and is preferred for frequent washing or higher demand.
Define the polishing direction, keep the film during handling, and use mechanical or adhesive fastening compatible with the substrate.
It can be used in low-demand decorative areas; for frequent moisture contact, intensive cleaning, or food applications, 304 should be evaluated.
It protects during fabrication and transport, but it does not replace good handling practices or prevent damage from impacts or strong abrasion.
The actual lot includes 0,70 mm, 0,90 mm, and 1,20 mm in 1219 x 2438 format.
The values in this table are nominal reference data. Before using them in engineering decisions — design, erection or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — review the technical notice and limitation of liability at the end of this page and your project's design code.
304 Stainless Steel Checkered Plate (Hot Rolled)
304 Stainless Steel Embossed Checkered Sheet (Cold Pressed)
201 Stainless Steel Sheet 2B Finish
304 Stainless Steel Sheet #1 Finish (Hot Rolled)
304 Stainless Steel Sheet #4 PE FinishUpdated: July 29, 2026
The dimensions, thicknesses, finishes and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASTM, ASME, ISO, NTC and EN, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and thickness tolerances, surface finish and residual stresses from rolling or forming — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: overloads, vibration, mechanical or thermal fatigue, corrosion and operating conditions different from those stated.
To know the certified behavior of a specific lot, TECTUL supplies the manufacturer's mill test certificate (MTC) upon request; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever structural integrity may compromise people or property; in such cases, consult our technical team first.
