Carbon Steel SCH 40 Butt-Weld Elbow✔️economical is a product in the pipe fittings family for fluid conduction in carbon steel, SCH 40. 13 sizes published with per-variant price and availability. Weld connection. Price from $ 2.100 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58731-01 | 1/2" | $ 2.100 | In stock | ||
| VT-58731-02 | 3/4" | $ 2.100 | In stock | ||
| VT-58731-03 | 1" | $ 2.100 | In stock | ||
| VT-58731-04 | 1-1/4" | $ 2.100 | In stock | ||
| VT-58731-05 | 1-1/2" | $ 2.100 | Made to order | ||
| VT-58731-06 | 2" | $ 2.100 | In stock | ||
| VT-58731-07 | 2-1/2" | $ 2.100 | In stock | ||
| VT-58731-08 | 3" | $ 2.100 | In stock | ||
| VT-58731-09 | 4" | $ 2.100 | In stock | ||
| VT-58731-10 | 5" | $ 2.100 | Made to order | ||
| VT-58731-11 | 6" | $ 2.100 | In stock | ||
| VT-58731-12 | 8" | $ 2.100 | Made to order | ||
| VT-58731-13 | 10" (Bajo pedido) | $ 2.100 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Acero al carbón |
| Standard | SCH 40 |
| Connection | Weld |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The carbon steel SCH 40 butt-weld 90° elbow changes the direction of the line with butt welding: the permanent joint for industrial networks carrying water, air, steam, oils and gases. Manufactured in ASTM A234 WPB under the ASME B16.9 dimensional standard, in long radius (1.5 × DN) — the standard for reducing pressure drop — with beveled ends ready for the root pass.
| Nominal diameter | Center to end (mm) |
|---|---|
| 1" | 38 |
| 1-1/2" | 57 |
| 2" | 76 |
| 2-1/2" | 95 |
| 3" | 114 |
| 4" | 152 |
| 6" | 229 |
| 8" | 305 |
| 10" | 381 |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Nominal values for the ASME B16.9 long-radius series. Verify the dimensional data for the lot in the certificate if your prefabrication is critical.
| Joint | When to use it |
|---|---|
| Butt weld (this page) | Permanent industrial lines, better flow and tightness, any pressure validated by the code |
| Threaded | Small diameters and services where thread is accepted; removable |
| Grooved | Fast, removable mechanical installation with couplings; fire protection networks and general services |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
This same family includes tees, reducers, caps and 45° elbows under the same standard to complete your prefabrication. Dispatches to Bogotá, Medellín, Cali, Barranquilla and all of Colombia — request a quote via WhatsApp with diameters and quantities.
The price is per unit and changes by diameter (1/2" to 10") — the table on this page shows each size. For a prefabrication package (elbows + tees + reducers), request kit pricing via WhatsApp.
It means the center-to-end distance is 1.5 times the nominal diameter (for example, 76 mm on 2"). It is the ASME B16.9 standard that reduces pressure drop and erosion compared with short radius.
Yes, if your pipe is SCH 40 of the same diameter: the wall thickness matches and the butt weld is even. For SCH 80 use the corresponding SCH 80 elbow.
For butt-weld fittings (elbows, tees, reducers), the correct specification is ASTM A234 WPB. A105 is the forging for flanges and threaded/socket-weld fittings.
Butt-weld for permanent industrial lines: better tightness and flow. Threaded when you need disassembly or the service accepts thread in small diameters. Both are in the catalog.
Beveled according to ASME B16.25: tack aligned with the pipe, root pass and fill according to the project WPS (typical E6010 + E7018 on carbon steel — we also carry electrodes in 5 brands).
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded Ends
Grooved Bell ReducerUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
