Galvanized Elbow is a product in the pipe fittings family for fluid conduction in galvanized steel. 12 sizes published with per-variant price and availability. Threaded connection. Price from $ 2.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58528-01 | 1/4" | $ 2.600 | In stock | ||
| VT-58528-02 | 3/8" | $ 2.600 | In stock | ||
| VT-58528-03 | 1/2" | $ 2.600 | In stock | ||
| VT-58528-04 | 3/4" | $ 2.600 | In stock | ||
| VT-58528-05 | 1" | $ 2.600 | In stock | ||
| VT-58528-06 | 1-1/4" | $ 2.600 | In stock | ||
| VT-58528-07 | 1-1/2" | $ 2.600 | In stock | ||
| VT-58528-08 | 2" | $ 2.600 | In stock | ||
| VT-58528-09 | 2-1/2" | $ 2.600 | In stock | ||
| VT-58528-10 | 3" | $ 2.600 | In stock | ||
| VT-58528-11 | 4" | $ 2.600 | In stock | ||
| VT-58528-12 | 6" | $ 2.600 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Galvanizado |
| Connection | Threaded |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
Threaded Galvanized Elbow is a threaded galvanized iron elbow for direction changes in water, air and general service networks. At TECTUL it is offered in galvanized iron, with selection by real catalog size and focus for industrial buyers in Colombia. This product differs within the pipe fitting family by its connection, material and function: it is not automatically interchangeable with fittings of another schedule, end or geometry. Threaded for removable assembly without welding; confirm fluid compatibility with galvanizing. To specify it correctly, define diameter, connection type, fluid, operating temperature, installation environment and maintenance requirement. When the project mentions standards such as ASME, ASTM, MSS, ISO, NTC or gas and sanitary codes, the purchase must be tied to the technical data sheet and the approved installation procedure.
| Available size | Sales unit |
|---|---|
| 1/4" | Sold by units (Unit) |
| 3/8" | Sold by units (Unit) |
| 1/2" | Sold by units (Unit) |
| 3/4" | Sold by units (Unit) |
| 1" | Sold by units (Unit) |
| 1-1/4" | Sold by units (Unit) |
| 1-1/2" | Sold by units (Unit) |
| 2" | Sold by units (Unit) |
| 2-1/2" | Sold by units (Unit) |
| 3" | Sold by units (Unit) |
| 4" | Sold by units (Unit) |
| 6" | Sold by units (Unit) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp at TECTUL indicating size, quantity, delivery city and use conditions to confirm availability and equivalent technical alternative if applicable.
The price depends on size, availability and quantity. At TECTUL we quote by unit with the real product specification and dispatch to your city.
Threaded Galvanized Elbow differs by its material, connection or main function. A black iron elbow may work in another installation condition, so it is advisable to validate the end and use before purchasing.
It is installed by aligning the pipe, preparing the joining surfaces and applying the corresponding procedure: thread, welding, heat fusion, solvent cement, flange or grooved coupling depending on the product.
The sizes published on this page are taken from the real TECTUL lot; if you need a combination not listed, availability is validated by request.
It depends on the material, seals, temperature, design pressure and project regulations. Before installing, confirm compatibility with water, air, gas, steam, chemicals or another specific fluid.
Yes. We dispatch to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia according to availability and logistics conditions.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
