Malleable Iron Elbow 300 lb Threaded is a product in the pipe fittings family for fluid conduction in iron. 11 sizes published with per-variant price and availability. Threaded connection. Price from $ 7.800 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58550-01 | 1/4" | $ 7.800 | In stock | ||
| VT-58550-02 | 3/8" | $ 7.800 | In stock | ||
| VT-58550-03 | 1/2" | $ 7.800 | In stock | ||
| VT-58550-04 | 3/4" | $ 7.800 | In stock | ||
| VT-58550-05 | 1" | $ 7.800 | In stock | ||
| VT-58550-06 | 1-1/4" | $ 7.800 | In stock | ||
| VT-58550-07 | 1-1/2" | $ 7.800 | In stock | ||
| VT-58550-08 | 2" | $ 7.800 | In stock | ||
| VT-58550-09 | 2-1/2" | $ 7.800 | Made to order | ||
| VT-58550-10 | 3" | $ 7.800 | Made to order | ||
| VT-58550-11 | 4" | $ 7.800 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Hierro |
| Connection | Threaded |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The 300 lb threaded malleable iron elbow changes direction in threaded metal lines with a higher pressure demand than Class 150. It is governed by ASME B16.3-2021 (Classes 150 and 300) with NPT thread per ASME B1.20.1-2013 (R2018). In 1/4" to 1", Class 300 allows 2000 psi (13.8 MPa) WOG up to 66 °C. The lot covers 1/4" to 4".
| Feature | Specification |
|---|---|
| Fitting standard | ASME B16.3-2021 — Malleable Iron Threaded Fittings, Classes 150 and 300 |
| Thread | NPT per ASME B1.20.1-2013 (R2018) |
| WOG pressure (water, oil, gas), −29 to 66 °C | 2000 psi (13.8 MPa) in 1/4"–1"; 1500 psi (10.3 MPa) in 1-1/4"–2"; larger sizes per the standard’s pressure-temperature table — confirm when quoting |
| Saturated steam | 300 psi (2.07 MPa) — basis of the Class 300 designation; allowable pressure decreases with temperature per the B16.3-2021 table |
| Material | Malleable iron; finish (black or galvanized) and lot grade confirmed when quoting |
| Lot sizes | 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4" |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Quote the 300 lb threaded malleable iron elbow via WhatsApp stating size, finish and quantity to confirm availability.
Per ASME B16.3-2021, Class 300 allows 2000 psi (13.8 MPa) WOG from −29 to 66 °C in 1/4"–1" and 1500 psi (10.3 MPa) in 1-1/4"–2"; on saturated steam the class basis is 300 psi (2.07 MPa). For larger lot sizes the standard’s table is confirmed when quoting.
Class 300 is the higher-pressure class of ASME B16.3-2021: it allows 2000 psi WOG up to 66 °C in 1/4"–1", while Class 150 is limited to 300 psi over that same temperature range.
Taper NPT thread per ASME B1.20.1-2013 (R2018), sealing by thread interference with the help of a compatible sealant.
With clean threads and compatible sealant: tighten while holding the body with a second wrench to avoid twisting the line, then leak-test before operating.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
