Stainless Steel Weld Elbow Sch 10 is a product in the pipe fittings family for fluid conduction in stainless steel, SCH 10. 13 sizes published with per-variant price and availability. Weld connection. Price from $ 13.400 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58688-01 | 1/2" | $ 13.400 | In stock | ||
| VT-58688-02 | 3/4" | $ 13.400 | In stock | ||
| VT-58688-03 | 1" | $ 13.400 | In stock | ||
| VT-58688-04 | 1-1/4" | $ 13.400 | In stock | ||
| VT-58688-05 | 1-1/2" | $ 13.400 | Made to order | ||
| VT-58688-06 | 2" | $ 13.400 | In stock | ||
| VT-58688-07 | 2-1/2" | $ 13.400 | In stock | ||
| VT-58688-08 | 3" | $ 13.400 | In stock | ||
| VT-58688-09 | 4" | $ 13.400 | In stock | ||
| VT-58688-10 | 6" | $ 13.400 | In stock | ||
| VT-58688-11 | 8" | $ 13.400 | Made to order | ||
| VT-58688-12 | 10" | $ 13.400 | Made to order | ||
| VT-58688-13 | 12" | $ 13.400 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Acero inoxidable |
| Standard | SCH 10 |
| Connection | Weld |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The stainless steel weld elbow sch 10 is a stainless steel fitting for welding in lines where a permanent, clean and corrosion-resistant joint is required. At TECTUL it is offered by unit and specified by nominal diameter and SCH 10 schedule. It differs from threaded stainless steel fittings because it eliminates removable joints and leakage points associated with sealants, but requires edge preparation, welding procedure and qualified personnel. Compared with the same geometry in SCH 10 or SCH 40, the schedule changes the wall thickness and must match the project pipe; it should not be mixed by appearance. To quote, indicate diameter, schedule, fluid, required finish and installation conditions.
| Available size | Observation |
|---|---|
| 1/2" | Subject to lot availability |
| 3/4" | Subject to lot availability |
| 1" | Subject to lot availability |
| 1-1/4" | Subject to lot availability |
| 1-1/2" | Subject to lot availability |
| 2" | Subject to lot availability |
| 2-1/2" | Subject to lot availability |
| 3" | Subject to lot availability |
| 4" | Subject to lot availability |
| 6" | Subject to lot availability |
| 8" | Subject to lot availability |
| 10" | Subject to lot availability |
| 12" | Subject to lot availability |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch stainless steel weld elbow sch 10 to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp indicating size, material, quantity, working fluid and required connection type to confirm availability and equivalent alternative when applicable.
The price depends on size, quantity, material and availability. Send us the reference via WhatsApp and TECTUL will quote with delivery to your city.
The real sizes registered for this lot are: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" and other lot sizes. Confirm availability before purchase because some references may be handled by request.
This page corresponds to Stainless Steel Weld Elbow Sch 10: it differs by material, connection or geometry. It should not be substituted without validating diameter, installation and function in the line.
Installation must respect the product connection type: threaded with compatible sealant, grooved with the correct gasket and coupling, welded with a qualified procedure, or PVC/PE according to system preparation.
It depends on the material, seals, project standard, temperature and fluid. TECTUL helps validate technical compatibility before dispatch.
Yes. We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia, coordinating transport according to order volume, weight and urgency.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
