Polypropylene Elbow with Metal Insert / Male Thread - 90° is a product in the pipe fittings family for fluid conduction in polypropylene. 6 sizes published with per-variant price and availability. Price from $ 18.740 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59306-01 | 1/2" | $ 18.740 | In stock | ||
| VT-59306-02 | 3/4" | $ 23.109 | In stock | ||
| VT-59306-03 | 1" | $ 45.630 | In stock | ||
| VT-59306-04 | 1/2" | $ 18.740 | In stock | ||
| VT-59306-05 | 3/4" | $ 23.109 | In stock | ||
| VT-59306-06 | 1" | $ 45.630 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Polipropileno |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
The PP fusion elbow with male metal insert combines a heat-fusible polypropylene connection with a male metal threaded outlet. It is used to connect valves, mixers, equipment, or threaded fittings from a PP fusion line without losing layout orientation. TECTUL specifies it by fusion size and thread, checking compatibility with the system. It differs from a PP fusion elbow without insert because it incorporates a metal transition, and from a female version because the available thread enters a receiving connection. Installation must protect the insert from overheating and lateral loads.
| Actual lot size | Unit |
|---|---|
| 1/2" | Unit |
| 3/4" | Unit |
| 1" | Unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the PP fusion elbow with male metal insert, indicating size, fluid, pipe type, and quantity to confirm availability.
The price depends on the size, material, connection, and requested quantity. TECTUL validates availability and quotes according to the required reference.
It differs by function, material, or connection type. Choosing the correct part prevents adapting incompatible fittings and reduces leakage risk.
Install it with clean surfaces, compatible size, and the method specific to the material: thread with sealant, PVC with cementing, or PP with controlled heat fusion.
Request the actual nominal size of the pipe or receiving fitting. For reductions and saddles, always indicate the main diameter and outlet diameter.
It depends on the material, fluid, temperature, and system standard. Before purchasing, confirm the application to select a compatible alternative.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other Colombian cities according to logistics availability.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
