PVC Sanitary CxE Elbow is a product in the pipe fittings family for fluid conduction in PVC. 5 sizes published with per-variant price and availability. Price from $ 4.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58591-01 | 1-1/2" | $ 4.000 | In stock | ||
| VT-58591-02 | 2" | $ 4.000 | In stock | ||
| VT-58591-03 | 3" | $ 4.000 | In stock | ||
| VT-58591-04 | 4" | $ 4.000 | In stock | ||
| VT-58591-05 | 6" | $ 4.000 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Pvc |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The PVC sanitary CxE elbow (hub × spigot) changes the drainage direction with a spigot end that fits directly into the next fitting’s hub, with no intermediate pipe stub. It works by gravity in sanitary, vent and rainwater networks with pipe per NTC 1087:2024 and solvent cement per NTC 576. The lot covers 1-1/2" to 6".
| Feature | Specification |
|---|---|
| System pipe standard | NTC 1087:2024 (eighth edition) — rigid PVC pipe for sanitary, rainwater and vent use |
| Fittings standard | NTC 1341 — PVC fittings for sanitary pipe; product seal of the lot confirmed when quoting |
| Ends | Hub (C) × spigot (E): the spigot cements directly into the next fitting’s hub |
| Joint | Solvent-cemented per NTC 576 |
| Service | Gravity drainage, venting and rainwater; not suitable for pressure lines |
| Compatible pipe requirements (NTC 1087:2024) | Minimum impact 81 J; water absorption ≤ 0.30 % by mass |
| Lot sizes | 1-1/2", 2", 3", 4", 6" |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Quote the PVC sanitary CxE elbow via WhatsApp stating size and quantity to confirm availability.
Hub by spigot: one end is a hub that receives pipe and the other is a spigot that fits directly into the next fitting’s hub, saving the short pipe stub a hub-by-hub elbow would require.
The Colombian sanitary system follows NTC 1087:2024 (eighth edition) for pipe, NTC 1341 for fittings and NTC 576 for solvent cement. The product seal of the lot is confirmed when quoting.
The CxC has two hubs and needs a pipe stub between consecutive fittings; the CxE couples directly with its spigot, useful in compact assemblies against traps, wyes or stacks.
No. It is a gravity-drainage fitting for sanitary, vent and rainwater networks; for pressure the PVC pressure line with fittings certified for that service is used.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
