Polypropylene Saddle with Female Metal Insert - Resistant is a product in the pipe fittings family for fluid conduction in polypropylene. 12 sizes published with per-variant price and availability. Price from $ 32.521 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59318-01 | 90 mm x 20 mm x 1/2" | $ 32.521 | Made to order | ||
| VT-59318-02 | 90 mm x 25 mm x 3/4" | $ 32.521 * | Made to order | ||
| VT-59318-03 | 90 mm x 32 mm x 1" | $ 68.908 | In stock | ||
| VT-59318-04 | 110 mm x 25 mm x 1/2" | $ 32.521 * | Made to order | ||
| VT-59318-05 | 110 mm x 25 mm x 3/4" | $ 32.521 * | Made to order | ||
| VT-59318-06 | 110 mm x 32 mm x 1" | $ 32.521 * | Made to order | ||
| VT-59318-07 | 90 mm x 20 mm x 1/2" | $ 32.521 | Made to order | ||
| VT-59318-08 | 90 mm x 25 mm x 3/4" | $ 32.521 * | Made to order | ||
| VT-59318-09 | 90 mm x 32 mm x 1" | $ 68.908 | Made to order | ||
| VT-59318-10 | 110 mm x 25 mm x 1/2" | $ 32.521 * | Made to order | ||
| VT-59318-11 | 110 mm x 25 mm x 3/4" | $ 32.521 * | Made to order | ||
| VT-59318-12 | 110 mm x 32 mm x 1" | $ 32.521 * | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping. Sizes marked with * show the base reference price.
| Family | Pipe fittings |
| Material | Polipropileno |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
The PP saddle with female metal insert creates a reinforced threaded branch on a main polypropylene pipe. It is useful for installing valves, instruments, consumption points, or equipment with male thread without replacing the main section with a tee. TECTUL selects it by pipe diameter, fusion outlet, and female thread, according to the real combinations. It differs from a plastic PP fusion saddle because it incorporates a metal insert, and from a saddle with male metal insert because it receives an external thread. Installation must be performed with the proper saddle tool and support for heavy equipment.
| Actual lot size | Unit |
|---|---|
| 90 mm x 20 mm x 1/2" | Unit |
| 90 mm x 25 mm x 3/4" | Unit |
| 90 mm x 32 mm x 1" | Unit |
| 110 mm x 25 mm x 1/2" | Unit |
| 110 mm x 25 mm x 3/4" | Unit |
| 110 mm x 32 mm x 1" | Unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the PP saddle with female metal insert, indicating size, fluid, pipe type, and quantity to confirm availability.
The price depends on the size, material, connection, and requested quantity. TECTUL validates availability and quotes according to the required reference.
It differs by function, material, or connection type. Choosing the correct part prevents adapting incompatible fittings and reduces leakage risk.
Install it with clean surfaces, compatible size, and the method specific to the material: thread with sealant, PVC with cementing, or PP with controlled heat fusion.
Request the actual nominal size of the pipe or receiving fitting. For reductions and saddles, always indicate the main diameter and outlet diameter.
It depends on the material, fluid, temperature, and system standard. Before purchasing, confirm the application to select a compatible alternative.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla, and other Colombian cities according to logistics availability.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
