Stainless Wall Sleeve Grooved x Plain Ends is a product in the pipe fittings family for fluid conduction in stainless steel. 7 sizes published with per-variant price and availability. Price from $ 291.220 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-166907-01 | 2" | $ 291.220 | In stock | ||
| VT-166907-02 | 3" | $ 291.220 | In stock | ||
| VT-166907-03 | 4" | $ 291.220 | In stock | ||
| VT-166907-04 | 6" | $ 291.220 | In stock | ||
| VT-166907-05 | 8" | $ 291.220 | Made to order | ||
| VT-166907-06 | 10" | $ 291.220 | Made to order | ||
| VT-166907-07 | 12" | $ 291.220 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Acero inoxidable |
| Connection | Other |
| Availability | In stock |
The stainless wall sleeve grooved x plain ends is a fluid-handling fitting used to cross walls or tanks with one side prepared for a grooved coupling and the other for a plain or welded connection. At TECTUL it is specified by nominal size, stainless steel material, one grooved end and one plain end connection type and installation condition. It differs from grooved x flanged because it does not include a flange on the second end, giving greater field fabrication flexibility. When the project requires a code or standard, selection must be checked against drawings, fluid, temperature, working pressure, seal compatibility and test procedure; therefore it should not be selected only by appearance or outside diameter. Groove compatible with the mechanical couplings specified in the project. This page gathers the actual sizes in the lot, selection criteria and practical recommendations for industrial purchasing in Colombia, focused on reducing installation rework and compatibility errors among related fittings.
| Available size | Presentation |
|---|---|
| 2" | Unit |
| 3" | Unit |
| 4" | Unit |
| 6" | Unit |
| 8" | Unit |
| 10" | Unit |
| 12" | Unit |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the stainless wall sleeve grooved x plain ends with size, material, quantity, fluid and connection type to confirm availability and an equivalent alternative when the installation allows it.
The price depends on size, material, quantity and availability. Send us the exact reference via WhatsApp to quote the stainless wall sleeve grooved x plain ends with dispatch to your city.
They do not perform the same function. The stainless wall sleeve grooved x plain ends is selected because it does not include a flange on the second end, giving greater field fabrication flexibility. This difference prevents buying a fitting that physically fits but does not solve the connection point.
It is installed by checking size, alignment and connection type: one grooved end and one plain end. Before commissioning, the sealing, tightening or test procedure applicable to the system must be applied.
The sizes available in this lot are: 2", 3", 4", 6", 8", 10", 12".
No. Selection depends on chemical compatibility, temperature, pressure, pipe material and project standard. For gas, steam, food or chemicals, the complete specification must be validated.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and all of Colombia, coordinating packaging and transport according to order volume, weight and urgency.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
