Stainless Steel Tank Wall Fitting is a product in the pipe fittings family for fluid conduction in stainless steel. Available made to order, quoted via WhatsApp.
| Family | Pipe fittings |
| Material | Acero inoxidable |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
Stainless Steel Tank Wall Fitting is a TECTUL fitting for creating an outlet or inlet through the wall of a tank, cabinet, chamber or non-standard vessel. It is intended for industrial buyers who need to define size, material and connection without confusing it with similar references from the same family. Its main material is stainless steel and its key difference is its tank or wall application, different from pipe wall sleeves with defined flanged, grooved or plain ends. When the project requires a dimensional standard, material certificate, seal type or documented procedure, the reference must be confirmed with a technical data sheet before purchase. To quote accurately, it is useful to report fluid, quantity, nominal size, pipe type, mounting orientation, and whether the point will be fixed, removable, welded, solvent-cemented, threaded, flanged or grooved. We do not publish one single maximum pressure because performance depends on the complete line design, temperature, seals, support, joining method and commissioning test.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this stainless steel tank wall fitting, indicating size, quantity, required material, connection and use to confirm availability and price.
The price depends on size, material, connection, quantity and availability. At TECTUL we quote using the real installation data to avoid reference errors.
The tank wall fitting is selected by wall, seal and connection; the threaded-end wall sleeve corresponds to a pipe spool with threads on both ends.
Confirm wall thickness, seal type, connection orientation and tightening access before drilling or mounting.
Send size, quantity, material, connection type, fluid, a photo of the point if it is a replacement, and any standard or project requirement.
No. Compatibility of the material, seals, joining method and operating conditions must be validated against the system fluid and temperature.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
