Female-Male Polypropylene Fusion 45 Elbow - High Resistance is a product in the pipe fittings family for fluid conduction in polypropylene. 6 sizes published with per-variant price and availability. Fusion connection. Price from $ 4.000 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59316-01 | 1/2" | $ 4.000 * | Made to order | ||
| VT-59316-02 | 1/2" | $ 4.000 * | Made to order | ||
| VT-59316-03 | 3/4" | $ 4.000 * | Made to order | ||
| VT-59316-04 | 3/4" | $ 4.000 * | Made to order | ||
| VT-59316-05 | 1" | $ 4.000 * | In stock | ||
| VT-59316-06 | 1" | $ 4.000 * | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping. Sizes marked with * show the base reference price.
| Family | Pipe fittings |
| Material | Polipropileno |
| Connection | Fusion |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | Made to order |
| Factory PDF data sheet | Available from an advisor |
The female-male PP fusion 45 elbow is a polypropylene fitting for making smooth changes in direction, normally 45 degrees, in heat-fused installations. Its female-male design facilitates continuity when direct coupling with another fitting or section is needed without adding an extra union. It differs from the standard PP fusion 45 elbow because it combines different connection ends, useful when the assembly must compensate for orientation, space or installation sequence. It is common in cold or hot water networks with PP/PPR pipe, internal branches and points where reducing sharp changes in direction is convenient. Admissible pressure and temperature do not depend only on the fitting: they must be validated with the pipe, system class, fluid and applied heat-fusion procedure.
| Registered sizes | Material | Connection |
|---|---|---|
| 1/2" | Polypropylene | Female-male fusion |
| 3/4" | Polypropylene | Female-male fusion |
| 1" | Polypropylene | Female-male fusion |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the female-male PP fusion 45 elbow, indicating size, line color if applicable and required quantity.
It is quoted according to size and quantity. At TECTUL we confirm availability before dispatch.
This one is female-male; the standard PP fusion 45 elbow is used as a conventional fusion fitting without that combination of ends.
Pipe and fitting are heated with the proper die, assembled aligned and allowed to cool without torsion or load.
No. The 45 elbow is used for smoother changes in direction, typically associated with 45 degrees.
The registered sizes are 1/2", 3/4" and 1".
It must be validated with the PP/PPR pipe, system class and actual operating conditions.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
