White Threaded Polypropylene 45 Elbow is a product in the pipe fittings family for fluid conduction in polypropylene. 6 sizes published with per-variant price and availability. Threaded connection. Price from $ 3.109 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59263-01 | 1/2" | $ 3.109 | In stock | ||
| VT-59263-02 | 3/4" | $ 3.613 | In stock | ||
| VT-59263-03 | 1" | $ 6.303 | In stock | ||
| VT-59263-04 | 1-1/4" | $ 13.361 | In stock | ||
| VT-59263-05 | 1-1/2" | $ 19.496 | In stock | ||
| VT-59263-06 | 2" | $ 20.673 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Polipropileno |
| Connection | Threaded |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The white threaded PP 45 elbow is a 45° polypropylene elbow that turns a threaded plastic line without a full 90° bend. It joins by thread, with no heat fusion or cement, so it is demountable. This white threaded line has no NTC product standard: thread type and service limits are the manufacturer’s and are confirmed when quoting. Lot from 1/2" to 2".
| Feature | Specification |
|---|---|
| Angle | 45° (half-elbow) |
| Material | Polypropylene (PP), white |
| Joint | Threaded, demountable; thread type (NPT per ASME B1.20.1-2013 (R2018) or BSP) confirmed when quoting |
| Product standard | No specific NTC/ASTM designation for the white-line threaded PP fitting; manufacturer dimensions — confirm when quoting |
| Service | Low-complexity demountable water networks; manufacturer pressure and temperature limits confirmed when quoting |
| Lot sizes | 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Quote the white threaded PP 45 elbow via WhatsApp stating size, quantity and application to confirm availability.
No NTC/ASTM product designation applies to this white threaded line: dimensions and service limits are the manufacturer’s and are confirmed when quoting; if the thread is NPT, its geometry follows ASME B1.20.1-2013 (R2018).
The half-elbow turns the line 45° and the elbow turns it 90°; both share material and threaded joint, and the choice depends on the run layout.
No. This reference is threaded and demountable; for heat-fusion joints the PP fusion line is used, whose fittings are specified per ISO 15874-3:2013.
With an aligned thread and PP-compatible sealant: hand-tighten first to avoid cross-threading and finish without over-torque, since excess cracks the plastic fitting.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
