Sanitary PVC Trap is a product in the pipe fittings family for fluid conduction in PVC. 3 sizes published with per-variant price and availability. Price from $ 6.600 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58594-01 | 2" | $ 6.600 | In stock | ||
| VT-58594-02 | 3" | $ 6.600 | In stock | ||
| VT-58594-03 | 4" | $ 6.600 | Made to order |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Pvc |
| Connection | Other |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
Sanitary PVC Trap is a TECTUL fitting for forming a hydraulic seal in drainage networks, preventing odors from returning from the sanitary pipe. It is intended for industrial buyers who need to quickly identify size, connection and function without confusing it with similar references in the same family. Its main material is sanitary PVC and its key difference is a PVC trap curve for drainage, different from an elbow or wye that does not retain a hydraulic seal. When the project requires a dimensional standard, exact material, seal or certification, the selection must be confirmed with the technical data sheet before purchasing. To quote correctly, diameter alone is not enough: provide fluid, temperature if applicable, pipe type, mounting orientation, quantity and whether the point will be fixed, removable, welded, solvent-cemented, threaded or flanged. We do not publish a single maximum pressure because performance depends on the full line design, seals, temperature, joining method, support and commissioning tests.
| Reported actual size | Presentation |
|---|---|
| 2" | Sold by units (Unit) |
| 3" | Sold by units (Unit) |
| 4" | Sold by units (Unit) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this sanitary PVC trap indicating size, quantity, required material, connection and use to confirm availability and price.
The price depends on size, material, connection, quantity and availability. At TECTUL we quote using the actual installation data to avoid reference errors.
The trap creates a water seal; the cleanout adapter only allows inspection or unclogging and does not perform the hydraulic seal function.
Install with the correct slope toward discharge, leave access for cleaning and avoid cementing pieces before checking sanitary point alignment.
Send size, quantity, material, connection type, fluid, a photo of the point if it is a replacement and any project standard or requirement.
No. Material, seals, joining method and operating conditions must be validated against the fluid and system temperature.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
