White Threaded Polypropylene Cap is a product in the pipe fittings family for fluid conduction in polypropylene. 6 sizes published with per-variant price and availability. Threaded connection. Price from $ 1.681 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59264-01 | 1/2" | $ 1.681 | In stock | ||
| VT-59264-02 | 3/4" | $ 1.933 | In stock | ||
| VT-59264-03 | 1" | $ 3.697 | In stock | ||
| VT-59264-04 | 1-1/4" | $ 5.714 | In stock | ||
| VT-59264-05 | 1-1/2" | $ 9.664 | In stock | ||
| VT-59264-06 | 2" | $ 9.160 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Polipropileno |
| Connection | Threaded |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The white threaded PP cap is a closure fitting made of polypropylene to temporarily or permanently block a compatible male threaded connection. It is used in hydraulic networks, inspection points, tests, future branches and terminations where a removable closure is needed. It differs from the white threaded PP plug because the cap normally receives a male thread, while the plug enters a female thread; that gender difference is key to avoiding wrong purchases. White polypropylene offers a lightweight, corrosion-resistant solution, suitable for applications where the system, fluid and sealant are compatible. To select correctly, define the nominal diameter, identify whether you need a cap or a plug and confirm that the thread matches the existing fitting.
| Available sizes | Material | Type |
|---|---|---|
| 1/2" | White polypropylene | Threaded cap |
| 3/4" | White polypropylene | Threaded cap |
| 1" | White polypropylene | Threaded cap |
| 1-1/4" | White polypropylene | Threaded cap |
| 1-1/2" | White polypropylene | Threaded cap |
| 2" | White polypropylene | Threaded cap |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for your white threaded PP cap, indicating size, quantity and whether the closure will be temporary or permanent.
The price depends on size and quantity. TECTUL quotes the exact reference by unit.
The cap closes a male thread; the plug is installed in a compatible female thread.
It is threaded onto the male connection with compatible sealant, without exceeding tightening torque.
There are 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2".
It can be used as a closure if the complete system and test procedure are compatible with the fitting.
Yes, it is sold by units.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
