Galvanized Threaded Plug is a product in the pipe fittings family for fluid conduction in galvanized steel. 12 sizes published with per-variant price and availability. Threaded connection. Price from $ 1.700 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-58537-01 | 1/4" | $ 1.700 | In stock | ||
| VT-58537-02 | 3/8" | $ 1.700 | In stock | ||
| VT-58537-03 | 1/2" | $ 1.700 | In stock | ||
| VT-58537-04 | 3/4" | $ 1.700 | In stock | ||
| VT-58537-05 | 1" | $ 1.700 | In stock | ||
| VT-58537-06 | 1-1/4" | $ 1.700 | In stock | ||
| VT-58537-07 | 1-1/2" | $ 1.700 | In stock | ||
| VT-58537-08 | 2" | $ 1.700 | In stock | ||
| VT-58537-09 | 2-1/2" | $ 1.700 | In stock | ||
| VT-58537-10 | 3" | $ 1.700 | In stock | ||
| VT-58537-11 | 4" | $ 1.700 | In stock | ||
| VT-58537-12 | 6" | $ 1.700 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Galvanizado |
| Connection | Threaded |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
Galvanized Threaded Plug is a TECTUL fitting for closing female connections in water, air or services compatible with galvanized material. It is intended for industrial buyers who need to quickly identify size, connection and function without confusing it with similar references in the same family. Its main material is galvanized iron and its key difference is a male threaded plug, unlike a galvanized female cap that covers an external thread. When the project requires a dimensional standard, exact material, seal or certification, the selection must be confirmed with the technical data sheet before purchasing. To quote correctly, diameter alone is not enough: provide fluid, temperature if applicable, pipe type, mounting orientation, quantity and whether the point will be fixed, removable, welded, solvent-cemented, threaded or flanged. We do not publish a single maximum pressure because performance depends on the full line design, seals, temperature, joining method, support and commissioning tests.
| Reported actual size | Presentation |
|---|---|
| 1/4" | Sold by units (Unit) |
| 3/8" | Sold by units (Unit) |
| 1/2" | Sold by units (Unit) |
| 3/4" | Sold by units (Unit) |
| 1" | Sold by units (Unit) |
| 1-1/4" | Sold by units (Unit) |
| 1-1/2" | Sold by units (Unit) |
| 2" | Sold by units (Unit) |
| 2-1/2" | Sold by units (Unit) |
| 3" | Sold by units (Unit) |
| 4" | Sold by units (Unit) |
| 6" | Sold by units (Unit) |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for this galvanized threaded plug indicating size, quantity, required material, connection and use to confirm availability and price.
The price depends on size, material, connection, quantity and availability. At TECTUL we quote using the actual installation data to avoid reference errors.
The plug enters a female connection; the cap receives a male thread. They are not interchangeable even though both close a line.
Apply sealant to the male thread, tighten without exceeding torque and leave accessible if the point is for testing or maintenance.
Send size, quantity, material, connection type, fluid, a photo of the point if it is a replacement and any project standard or requirement.
No. Material, seals, joining method and operating conditions must be validated against the fluid and system temperature.
Yes. TECTUL dispatches to Bogotá, Medellín, Cali, Barranquilla and other cities in Colombia depending on availability and carrier.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
