White Threaded Polypropylene Male Plug is a product in the pipe fittings family for fluid conduction in polypropylene. 6 sizes published with per-variant price and availability. Threaded connection. Price from $ 1.092 COP before VAT.
| SKU | Size | Unit price (from) | Availability | Qty | |
|---|---|---|---|---|---|
| VT-59265-01 | 1/2" | $ 1.092 | In stock | ||
| VT-59265-02 | 3/4" | $ 1.597 | In stock | ||
| VT-59265-03 | 1" | $ 2.605 | In stock | ||
| VT-59265-04 | 1-1/4" | $ 4.286 | In stock | ||
| VT-59265-05 | 1-1/2" | $ 5.210 | In stock | ||
| VT-59265-06 | 2" | $ 9.076 | In stock |
Prices per size, per unit, before VAT. Confirmed in the quote together with shipping.
| Family | Pipe fittings |
| Material | Polipropileno |
| Connection | Threaded |
| Sales unit | Se vende por Unidades (Unid.) |
| Availability | In stock |
| Factory PDF data sheet | Available from an advisor |
The white threaded PP male plug is a polypropylene closure part installed inside a compatible female connection. It is used to seal branches, test points, fitting ends and outlets that must remain cancelled or available for maintenance. Its main difference from the white threaded PP cap is the connection gender: the plug enters a female thread, while the cap covers a male thread. This distinction avoids purchase errors on site. Because it is plastic and threaded, it requires compatible sealant, controlled tightening and verification of the receiving fitting type. It is a practical alternative for water networks and compatible fluids where corrosion resistance and ease of replacement are sought.
| Available sizes | Material | Type |
|---|---|---|
| 1/2" | White polypropylene | Threaded male plug |
| 3/4" | White polypropylene | Threaded male plug |
| 1" | White polypropylene | Threaded male plug |
| 1-1/4" | White polypropylene | Threaded male plug |
| 1-1/2" | White polypropylene | Threaded male plug |
| 2" | White polypropylene | Threaded male plug |
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
We dispatch to Bogotá, Medellín, Cali, Barranquilla and all of Colombia. Request a quote via WhatsApp for the white threaded PP male plug with size, quantity and closure application.
It is quoted according to size and quantity. TECTUL confirms availability by unit.
The male plug is installed in a female thread; the threaded cap is installed over a male thread.
It is threaded into the female connection with compatible sealant and moderate tightening.
The registered sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2".
Yes, if the system, sealant and service conditions are compatible.
No. This reference is threaded in white polypropylene.
Before using these data in engineering decisions — design, installation or systems with mechanical risk of pressure, rupture, fatigue, impact or water hammer — you must read the Technical notice and limitation of liability at the end of this page.
Carbon Steel SCH 40 Butt-Weld Elbow✔️economical
Rigid Grooved Coupling
Stainless Steel Threaded Elbow
Stainless Steel Threaded Union
Stainless Steel Wall Sleeve with Threaded EndsUpdated: July 22, 2026
The dimensions, thicknesses, pressures, temperatures and other characteristics stated in this data sheet are theoretical nominal reference values, compiled from publicly available technical sources: international standards (ASME, ASTM, API, MSS, ISO and NTC, depending on the product) and published engineering literature. They are average approximations intended to guide selection, not a certificate of conformity for any given lot.
Actual values may vary due to conditions inherent to the manufacturing process — dimensional and wall-thickness tolerances (in pipe, typically ±12.5%), surface finish and residual stresses from forming or welding — and to factors inherent to the raw material — chemical composition variations within the ranges allowed by the standard, inclusions or heat-to-heat differences. They may also be affected by in-service events not foreseeable at design time: water hammer, vibration, thermal and mechanical fatigue, corrosion and operating overpressures, which can cause the element to fail before its estimated service life.
To know the certified behavior of a specific lot, TECTUL supplies upon request the manufacturer's mill test certificate (MTC) issued per the product standard; for critical applications, laboratory testing of the lot can also be arranged. In the absence of such certification, the data provided here must not be used as the sole criterion in critical or safety applications, or wherever the integrity of the line may compromise the lives of people or property; in such cases, consult our technical team first.
